Request a Quote

Patton's micro-sized CopperLink™ Model 2110 Ethernet Booster transparently extends 100-Mbps Ethernet traffic along with IEEE 802.3af Power-over-Ethernet(PoE) up to 200 meters (656 feet)—TWICE as far as the 100-meter (328-feet) standard.

Install multiple Ethernet Boosters in a "daisy chain," to extend Ethernet traffic and PoE up to 500 meters (1640 feet)—FIVE TIMES the standard reach.

Reduce infrastructure costs and simplify deployment of Wireless Access Points (WAPs), IP cameras, VoIP handsets, and any LAN device. Since Patton's Ethernet Booster draws power from the PoE network, there is no external power supply to buy or install.

Because it eliminates the need for UPS equipment for power injection or additional Ethernet switches for signal regeneration, the micro-sized device reduces equipment costs and simplifies installation of any Ethernet-enabled device.

Providing 100-Mbps Ethernet Extension combined with PoE pass-through, the Model 2110 is transparent to WMV, MPEG-4, and MJPEG compression schemes and fully compatible with any standards-based PoE WAP, IP camera, or VoIP handset.

[Read the product press release... ]

Key Features and Benefits

• Ethernet & PoE Extension--Doubles 10/100Base-TX Ethernet and PoE to 200 meters (656 feet). Multiple units can be used in series for even longer extensions.
• Operates over CAT5--Reduces the cost and hassles of adding switches, hubs, and wireless access points.
• Plug and Play--No configuration or cable hassles during installation with auto-sensing 10/100, full or half duplex, and automatic MDI-X.
• Transparent LAN Operation--Transparent operation ensures the highest rate possible for each extension distance.
• No External Power Required--Power over Ethernet (PoE) capability enables both extenders and peripheral devices to be powered over standard twisted-pair Ethernet cable

[ Model 2110 802.3af Power and Distance Chart ]

[ Product application scenarios ]

[ Product specifications ]

[ Product User Manual ]