 |
|
 |
|
|
|
|
|
Trotec Laser, Inc. - Laser Marker FP300
Print
|
|
Trotec Laser, Inc. has introduced the FP300, a flatbed, gantry based laser containing a pulsed fiber laser source. The system has a work area of 29" X 17" and can process parts as tall as 6". The system is offered in three power levels, 10, 20, or 30 watts.
The FP300 is designed for high quality marking of bare and coated metals and many plastics. Thanks to Trotec's robust High-Speed Ramp Up-Control, the system is capable of a full 2 meters per second at a maximum resolution of 1000 ppi.
The FP300 uses the proven protection and performance of Trotec's InPack-TechnologyTM, combining brushless DC servo motors, optical encoders, self-lubricating linear bearings, patented steel reinforced drive belts and protection of the optics and all sensitive components. Trotec systems are designed for minimal wear-and-tear and eliminate the need for periodic replacement of belts and bearings.
Trotec offers product lines using CO2, YVO4 (Vanadate), Ytterbium, Fiber & Excimer laser sources coupled to both beam-steered Galvanometer and Flatbed, flying-optics motion systems.
Technical Specifications
Mechanics
Work area: 726 x 432 mm (29 x 17 in)
Maximum height of work piece: 150 mm (6 in)
Maximum engraving speed: 200 cm/sec. (79 in/sec.)
Motor: brushless DC servo motors
Lens: 3.2" (standard)
lens and all mirrors air-flushed
Maximum material load: 10 kgs (22 lbs)
Options
Electro-optic autofocus
Rotary attachment with cones
Air Assist including compressor
Trolley
Control System
Laser power: Adjustable 0 - 100%
Interface hardware: RS-232-C, USB
Interface software: ASCII, HPGL, Trotec JobControl (Expert)
Laser Equipment
Laser tube: Pulsed fiberlaser, maintenance-free
Laser Power 10, 20, & 30 W
Wavelength: 1062nm
Dimensions
Width: 1090 mm (42.9 inch)
Depth: 890 mm (35.0 inch)
Height: 590 mm (23.2 inch)
Weight: 90 kgs / 198lbs
Ambient Conditions
Ambient conditions: Operating temperature +5° to +38° C
Humidity up to max. 90%, non-condensing
Dust free environment (2nd degree according to IEC 60947-1)
Laser Safety
Laser class: CDRH Class 2, CE tested
Interlock: Double safety interlock system
Part Saved
Save part