See Product Details

Overview

DeviceNet has gone wireless! Escape the limitations of hard wired systems using Matric's Wireless CAN Bridge. The Wireless CAN Bridge is ideal for any distributed application where wiring is easily damaged, or where freedom of motion is critical.

The Wireless CAN Bridge functions as a wireless modem that transfers CAN messages. Using the Wireless CAN Bridge, a single DeviceNet scanner can control nodes on either side of a wireless link with up to 200 feet of separation. A full 64 node DeviceNet can be implemented depending on scan rates and frame density. Since actual CAN messages are transferred, the Wireless CAN Bridge supports any type of CAN bus standard including CAN Open, CAN Kingdom and J1939.

Matric wireless control systems are designed to operate reliably in harsh industrial environments. Careful choice of materials and a quality design process has made Matric products the top choice for industrial process control for more than 20 years.

General

• Size: 3 1/8 X 3 X 6 5/16 inches
• Weight: 2 lb
• DIN rail or four screw mount
• 1200 frames per second transfer rate
• Five pin male micro connector
• 16 bit CPU
• CPU watchdog
• Powered by 24VDC +/- 5%

Radio

• 2.4 GHz Spread Spectrum
• Up to 200 feet range (unobstructed line of sight)
• Remote antenna mount to 30 feet
• License free radio (FCC Part 15B)

Configuration

• Easy integration (no programming required)
• Configuration via internal dip switches
• Radio link master or slave
• Hi/low power
• Standard versus extended CAN frame formats
• Baud rate (125K, 250K, 500K)
• Mode (Data security and throughput options)

Indicators

• Signal strength
• Bus loading
• Data Loss Cause
• Power

Physical

• Enclosure sealed to IP65 (washdown)
• Operational temperature 0°C to +70°C
• Storage temperature -40°C to +85°C