Frequency Converters and Translators Specifications

Find: Advanced >>

Home > Data Acquisition and Signal Conditioning > Signal Converting > Frequency Converters and Translators > Specifications

What do you want to do?
		Show All Frequency Converters and Translators Companies
		Learn more about Frequency Converters and Translators
		Search By Specification

Device Specifications


	Analog Input Channels:		This is the maximum number of analog channel inputs. The single-ended number is specified when single-ended inputs are available as twice the number of differential inputs. Differential channels use the difference between two signals as an input; common mode is filtered out. In some systems, differential inputs are combinations of two single-ended inputs. When this is the case, twice the numbers of differential channels are available as single-ended inputs.
	Search Logic:		All matching products will have a value greater than or equal to the specified value.

	Differential Channels		Differential channels have two inputs. The signal to process is the voltage (V) difference between the two inputs. For example, if one reading is 4.93 V and the other reading is 5.16 V, the meaningful value is the 0.23 V difference between the two. Often, this applies to precision measurements where the difference between two low voltage inputs is small but critical.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	Bandwidth:		Bandwidth is the difference between the high and low limits of the frequency response, typically defined by a variation from a nominal value by a stated value such as 3 dB.
	Search Logic:		All matching products will have a value greater than or equal to the specified value.

	Accuracy:		Accuracy depends on the signal conditioning linearity, hysteresis, temperature considerations, etc. It is represented here as percent full scale of measurement range.
	Search Logic:		All matching products will have a value less than or equal to the specified value.

	Signal Isolator		Signal isolation is the separation of any direct electrical contact of a signal. This can be done in various ways including optical isolation, capacitors, and magnetic induction.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	SATCOM Application		The devices are designed for satellite communications.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

Signal Inputs


	AC Voltage Input?
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	AC Current Input?
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

Form Factor


	Form Factor
	Your choices are...
	Integrated Circuit (IC)		Devices are integrated circuit (IC) chips that mount on printed circuit boards (PCBs).
	Printed Circuit Board (PCB)		Devices are printed circuit boards (PCBs) that attach to enclosures or plug directly into computer backplanes.
	Panel / Chassis Mount		Devices attach to a panel or bolt onto a chassis.
	Modular Bay / Slot System		Devices stack in modular bays or slots and can be interfaced to other units.
	DIN Rail		Devices mount on a standard DIN rail. DIN is an acronym for Deutsches Institut für Normung (DIN), a German national organization for standardization.
	Rack Mount		Devices are rack-mounted and fit inside enclosures such as a standard 19” telecommunications rack.
	Stand Alone		Devices are benchtop or floor-standing units with a full casing or cabinet and an integral interface.
	Other		Other unlisted form factors.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Filter Specifications


	Integral Filter?		A filter will allow certain signal frequencies to pass while attenuating others. Filters can operate on signal phase also.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	Filter Architecture:
	Your choices are...
	Analog (RC)		An analog filter is designed with resistors and capacitors. It is used for analog signals only and is often used in low-noise requirement applications.
	Digital (FIR, IIR)		A digital filter is designed with solid state components and is used for digital signals and quantized signals from a sample-and-hold amplifier. This category includes Finite Impulse Response (FIR) and Infinite Impulse Response (IIR) filters. Digital filtering can approach ideal bandpass characteristics.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

	Filter Function:
	Your choices are...
	Low Pass		Low pass filters block or attenuate signals at frequencies above the specified cutoff frequency.
	High Pass		High pass filters block or attenuate signals at frequencies below the specified cutoff frequency.
	Band Pass		Band pass filters block or attenuate signals at frequencies outside of the specified low pass and high pass cutoff frequencies. This is frequently done by combining or "cascading" low-pass and high-pass filters.
	Band Stop		Band stop filters block a portion of the frequency spectrum, allowing lower and higher frequencies to pass.
	All Pass		All-pass filters allow all frequencies to pass; they can be used to introduce desired phase shifts in signals.
	Other		Unlisted or specialized form of filter.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

	Low Pass Cutoff Frequency:		Nominal frequency below which input signal is passed and above which the signal is blocked.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.

	High Pass Cutoff Frequency:		Nominal frequency above which the input signal is passed and below which the signal is blocked.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.

	Programmable Filter?		Filter parameters such as cutoff frequencies may be interactively programmed by user.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

Amplifier Specifications


	Integral Amplifier?		Amplifiers multiply a signal to the matching scale of the input device. Amplifier gains, or multiplication factors, may be greater than one or fractional for signal reduction.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	Programmable Gain?		Amplifier gain may be adjusted according to the application needs. Adjustment may be from a local interface (such as a front panel) or from a computer interface.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.

	Gain Range:		Gain is the factor by which the input signal is multiplied. Gains are frequently greater than unity, but may be fractional when a reduction (attenuation) of signal amplitude is desired.
	Search Logic:		User may specify either, both, or neither of the limits in a "From - To" range; when both are specified, matching products will cover entire range. Products returned as matches will meet all specified criteria.

	Maximum Output:		This is the limit of output voltage.
	Search Logic:		All matching products will have a value greater than or equal to the specified value.

User Interface


	User Interface
	Your choices are...
	None		No user input or programmability; "black box" style of storage for download or processing elsewhere.
	Front Panel & Display		Integral controls, keypad, and/or display on the panel of the unit.
	Touch Screen		The device's visual display screen is contact sensitive to allow direct input.
	Hand-held / Remote Programmer		Interface unit specifically meant to hold in hand while entering program parameters; may include remote programming.
	Computer Programmable		Device is interfaced to a separate supervisory or host computer.
	Other		Any unlisted user interface method.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Find Companies by Name

©1999-2010 GlobalSpec. All rights reserved.
Use of GlobalSpec is governed by these Terms of Use and Privacy Policy.

Penton Media, Inc. Site Use Agreement :: Privacy Policy
Home :: Article Archive :: CD Library :: CAD Library :: Site Map