|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Brushless Motor
|
|
Brushless motors have their armature windings on the stator and the field on the rotor. They rely on internal noncontact sensing devices to activate external commutating electronics.
|
| |
Brush Motor
|
|
Brush motors have the armature windings on the rotor. The magnetic fields are commutated via direct contact of brushes with the rotor commutator.
|
| |
Linear Motor
|
|
A linear motor generates force only in the direction of travel. Linear motors are capable of extremely high speeds, quick acceleration, and accurate positioning.
|
| |
Power Generator
|
|
Windings for use for power generation.
|
| |
Servo Motor
|
|
A servo motor is one in which the output movement is measured, fed back, and compared to some desired input function, at which point corrections are made to decrease the error between the two. Servo motors need to rapidly respond to changes in speed and position, which require high acceleration and deceleration rates. Servo motors also need to respond to small changes in control signal.
|
| |
Stepper Motor
|
|
A type of motor that moves in discrete amounts with each electrical pulse.
|
| |
Switch Reluctance Motor
|
|
A motor in which the rotor has no permanent magnets or windings. When one of the four phases of the stator is energized, the closest set rotor poles (made up of reluctance magnets) is pulled into alignment. The switched reluctance motor along with the four-phase converter is meant to be used as a precise speed control device. This motor type is similar to reluctance step motors.
|
| |
Torque Motor
|
|
This type of motor is designed to exert a rated torque, rather than a rated power. They are frequently operated in a stalled condition to maintain tension on conveyors, take-ups, and similar apparatus. Continuous stalled operation causes heat generation to be a significant issue, occasionally requiring external cooling fans.
|
| |
Traction Motor
|
|
Electric motor used to provide the drive to a locomotive or train axle. The traction motor is mounted close to the axle and transmits power through a reduction gearbox. Used in diesel-electric and electric systems.
|
| |
Other
|
|
Other motor type not listed.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Phase
|
|
|
| |
Your choices are...
|
|
|
| |
Single Phase Motor
|
|
Has a single alternating current source.
|
| |
Polyphase (3-phase) Motor
|
|
For use with three-phase power, motors provide efficient service for moderate to hard to start equipment such as pumps, blowers, and air-compressors.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
Application / Industry
|
|
|
| |
Your choices are...
|
|
|
| |
Avionics / Aerospace
|
|
For use in aviation or aerospace applications.
|
| |
Automotive
|
|
For use in automotive applications.
|
| |
Industrial
|
|
Broad grouping for many industrial applications, including manufacturing equipment, industrial transportation, factory automation, etc.
|
| |
Marine
|
|
For use on ships or boats.
|
| |
Medical
|
|
For use in the medical industry.
|
| |
Military
|
|
Design considerations include adherence to military specifications, materials, documentation, etc.
|
| |
Motion Control
|
|
Motor used for motion control.
|
| |
Power Generation
|
|
Windings for use in a power generator.
|
| |
Other
|
|
For unlisted specialized applications or industry use.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
Design Assistance
|
|
Supplier can assist with concepts, manufacturing costs, manufacturing techniques and material considerations. Supplier may also be able to assist in upgrading or redesigning, re-evaluating or modernizing existing products to increase performance and/or reduce manufacturing costs. Some suppliers offer material sourcing and CAD modeling as well.
|
| |
Prototyping
|
|
Vendor has the capability to quickly produce a prototype for visual or tryout inspection.
|
| |
Production Facilities
|
|
Vendor has the ability to run production quantities at their facility.
|
| |
CAD / CAM Support
|
|
Assistance in designing components more efficiently fabricated by machining processes, generating CAD drawings or process engineering.
|
| |
Rewind / Refurbish
|
|
Vendor has the ability to rewind and or refurbish motor components.
|
| |
Stator Assembly
|
|
Vendor manufactures and sells custom stator / winding assemblies.
|
| |
Other
|
|
Other services
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
CE
|
|
The CE-marking is a regulatory community sign that has to be obligatorily affixed on industrial products conforming to European Union standards. However, the CE-mark is not yet a quality mark.
|
| |
CSA
|
|
The CSA Mark may appear alone or with indicators. If it appears alone, it means that the product is certified for the Canadian market, to the applicable Canadian standards. If this Mark appears with the indicator "C and US" or "NRTL/C" it means that the product is certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
|
| |
IEC
|
|
The International Engineering Consortium (IEC) publishes and maintains standards for electrical product conformity testing and certification. Motors are only one area among many hundreds of electrical products for which the IEC has published standards.
|
| |
ISO 9001 / 9002
|
|
In 1987, International Standards Organization (ISO) 9000 standards were developed to ensure those companies' products and services have consistent, documented approaches that meet the European community's quality requirements.
ISO 9001 sets out the requirements for an organization whose business processes range all the way from design and development, to production, installation and servicing.
ISO 9002 is a quality assurance model made up of quality system requirements. This model applies to organizations that produce, install, and service products. ISO expects organizations to apply this model, and to meet these requirements, by developing a quality system.
|
| |
MIL-SPEC / STD
|
|
Capable of manufacturing boards that meet MIL-SPEC or MIL-STD.
|
| |
UL
|
|
Underwriters Laboratories (UL) Marks are used only on component parts that are part of a larger product or system. These components may have restrictions on their performance or may be incomplete in construction. Products intended for Canada carry the Recognized Component Mark "C."
|
| |
VDE
|
|
The Association for Electrical, Electronic & Information Technologies, a non-profit association for electrical science and technology, publishes standards and certification requirements for many electrical and electronic components.
|
| |
Other
|
|
Motor designs include unlisted certifications or standards.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
|
| |
|
|
|
| |
Your choices are...
|
|
|
| |
North America
|
|
This selection will only return companies located in the United States, Canada or Mexico.
|
| |
United States Only
|
|
This selection will return only companies located within the United States.
|
| |
Northeast US Only
|
|
This selection will return only companies located in the Northeast US; namely Connecticut, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island and Vermont.
|
| |
Southern US Only
|
|
This selection will return only companies located in the Southern US; namely Alabama, Arkansas, Delaware, Florida, Georgia, Kentucky, Louisiana, Maryland, Mississippi, Missouri, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Virginia, Washington D.C., and West Virginia.
|
| |
Southwest US Only
|
|
This selection will return only companies located in the Southwest US; namely Arizona, California, Colorado, Nevada, New Mexico and Utah.
|
| |
Northwest US Only
|
|
This selection will return only companies located in the Northwest US; namely Idaho, Montana, Oregon, Washington and Wyoming.
|
| |
Midwest US Only
|
|
This selection will return only companies located in the Midwest US; namely Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota, Nebraska, North Dakota, Ohio, South Dakota and Wisconsin.
|
| |
Canada Only
|
|
This selection will return only companies located in Canada.
|
| |
South / Central America Only
|
|
This selection will return only companies with facilities in South American countries such as Argentina, Brazil, Chile, or in Central American countries such as Costa Rica, Honduras, Panama, etc.
|
| |
Europe Only
|
|
This selection will return only companies located in Europe; namely Germany, Ireland, Italy, United Kingdom, etc.
|
| |
South Asia Only
|
|
This selection will return only companies located in South Asia; namely India, Pakistan, Nepal, etc.
|
| |
Near East Only
|
|
This selection will return only companies located in the Near East; namely Egypt, Israel, Saudi Arabia, etc.
|
| |
East Asia / Pacific Only
|
|
This selection will return only companies located in East Asia; namely China, Japan, Taiwan, etc.
|
| |
Other
|
|
Any unlisted country or region.
|
| |
Search Logic:
|
|
Products with the selected attribute will be returned as matches. Leaving or selecting "No Preference" will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
|
