|
|
| |
Features
|
|
|
| |
Your choices are...
|
|
|
| |
Adjustable Sampling Rate
|
|
The sampling rate is manually adjustable.
|
| |
Alarm LED
|
|
Alarm light-emitting diodes (LEDs) light when the RMS value or peak value is greater than the range. Typically, alarm LEDs light only when the range has been greatly exceeded.
|
| |
Application Software
|
|
The device has embedded application software.
|
| |
Auto-Ranging
|
|
Auto-ranging devices are self-adjusting to offer the best measurement scenario.
|
| |
Battery Powered
|
|
Devices are battery-powered.
|
| |
Data Acquisition
|
|
Devices with data acquisition capabilities have a computer interface and software for uploading data.
|
| |
Data Storage / Logging
|
|
Data storage or data logging devices have internal memory for storing data.
|
| |
dB Readings
|
|
Devices measure values in decibels (dB).
|
| |
External Shunts
|
|
External shunts can be used to extend the current input range. For example, an input that exceeds 5 A can be measured by providing a shunt.
|
| |
Filters
|
|
Devices have embedded filters.
|
| |
Integrating Functions
|
|
Integrating functions allow the active power and current to be integrated (Wh and Ah).
|
| |
Mirrored Scale
|
|
Mirrored scales make it easier to read the instrument to
a given accuracy by enabling the operator to avoid parallax errors.
|
| |
Overload Protection
|
|
Devices with overload protection have fuses or other devices to protect the meter.
|
| |
Programmable
|
|
Programmable devices can be programmed with trigger values to perform measurements.
|
| |
Range Switch
|
|
Range switches can be used to select an appropriate range of units to be measured.
|
| |
Removable Data Storage
|
|
Devices with removable data storage have removable memory, drives, etc.
|
| |
Scaling Function
|
|
Devices with a scaling function allow the pre-setting of the potential transformer and current transformer ratio, and the power scaling factor.
|
| |
Temperature Compensated
|
|
Temperature-compensated devices are designed to counteract known errors caused by temperature changes.
|
| |
Triggering
|
|
Devices with triggering have an interface for external triggering.
|
| |
Other
|
|
Other unlisted options / features.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Output Interface
|
|
|
| |
Your choices are...
|
|
|
| |
USB
|
|
Universal serial bus (USB) is a 4-wire, 12-Mbps serial bus for low-to-medium speed peripheral device connections to personal computers (PC), including keyboards, mice, modems, printers, joysticks, audio functions, monitor controls, etc. The USB design is standardized by the USB Implementers Forum (USBIF), an organization that includes leading companies from the computer and electronics industries. The current USB specification is USB 2.0, which supports data transfer rates of up to 480 Mbps.
|
| |
GPIB
|
|
The general-purpose interface bus (GPIB) is designed to connect computers, peripherals and laboratory instruments so that data and control information can pass between them. It was originally developed by Hewlett Packard (HP) and called the HPIB bus. GPIB is also know as the IEEE 488 bus, and is electrically equivalent to the IEC 625 bus.
|
| |
RS232
|
|
RS232 is a serial interface approved by the Electronic Industries Association (EIA). RS232 uses two-way transmissions and is common in low-end professional and consumer equipment.
|
| |
BCD
|
|
Binary coded decimal (BCD) is a circuit code which represents decimal numbers in binary code. With BCD, each decimal digit is represented by the four-bit binary representation of the digit.
|
| |
D/A
|
|
The output interface is digital-to-analog (D/A).
|
| |
Other
|
|
Other unlisted interfaces.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Standards and Certifications
|
|
|
| |
Your choices are...
|
|
|
| |
RoHS Compliant
|
|
Restriction of Hazardous Substances (RoHS) is a European Union (EU) directive that requires all manufacturers of electronic and electrical equipment sold in Europe to demonstrate that their products contain only minimal levels of the following hazardous substances: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyl, and polybrominated diphenyl ether. RoHS became effective on July 1, 2006.
|
| |
CSA Mark
|
|
Products that bear a CSA Mark have been tested by the Canadian Standards Association (CSA) and meet applicable standards for safety and/or performance. These standards are written and administered by organizations such as the American National Standards Institute (ANSI), Underwriters Laboratories (UL), and CSA International. CSA Marks may appear alone or with indicators. CSA Marks that appear alone are used with products certified primarily for the Canadian market, to the applicable Canadian standards. CSA Marks that appear with the indicators “C” and “US” or “NRTL/C” is used with products certified for both the U.S. and Canadian markets, to the applicable U.S. and Canadian standards.
|
| |
CE Marking
|
|
CE Marking indicates that a product complies with the essential requirements of relevant European Union (EU) directives that uphold national standards for health, safety, and environmental protection. CE Marking is required in the countries of the European Economic Area (EEA), an organization that consists of the twenty five member states of the EU and the three members of the European Free Trade Association (EFTA). CE Marking refers to the safety of a product. It is not a quality standard.
|
| |
UL
|
|
Underwriters Laboratories (UL) is a non-profit organization that tests components, systems, and materials according to its published standards for safety. Products that receive UL approval bear a UL Mark.
|
| |
IEC 61010
|
|
The International Electrotechnical Commission (IEC) standards are an international organization that prepares and publishes International Standards for all electrical, electronic and related technologies. IEC 61010 standards are designed for protection against transient voltages. There are four categories: CAT I, CAT II, CAT III, and CAT IV. Within each category, there are standards based on the rated voltage (e.g., CAT III 1000 V, and CAT III 600 V). The EMC IEC standards rule on conformity assessment (certifications) to certify that equipment, systems or components conform to its International Standards. Most of the IEC standards on EMC are part of the IEC 61000 series of standards.
|
| |
WEEE Compliant
|
|
Waste Electrical and Electronics Equipment (WEEE) is a European Union (EU) directive designed to encourage the reuse, recycling and recovery of electrical and electronic equipment. WEEE is also designed to improve the environmental impact and performance of this equipment. The WEEE directive establishes requirements and criteria for the collection, treatment, recycling and recovery of electrical and electronic equipment. It also makes producers responsible for financing these activities. Retailers and distributors must provide a way for consumers to return used or obsolete equipment without charge.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
