|
|
| |
Jaw Type
|
|
|
| |
Your choices are...
|
|
|
| |
Base Jaw
|
|
A base jaw (master jaw) is attached to the chuck body and is the component that the top jaws are mounted to. Base jaws move radially, toward and away from the work being chucked, carrying the top jaws with them.
|
| |
Hard Jaw
|
|
Hard jaws are top jaws made to final size from hardened steel. Top jaws clamp the workpiece and are mounted to a master (base) jaw.
|
| |
Soft Jaw
|
|
Soft jaws are top jaw blanks that can be machined to specified dimensions. Soft jaws are usually manufactured from unhardened steel, aluminum, or cast iron. Top jaws clamp the workpiece and are mounted to a master (base) jaw.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Jaw Style
|
|
|
| |
Your choices are...
|
|
|
| |
1.5mm x 60° Serrated
|
|
The mounting interface between the top jaw and the base jaw is a 1.5mm x 60° serrated surface, also referred to as fine serrated.
|
| |
3.0mm x 60° Serrated
|
|
The mounting interface between the top jaw and the base jaw is a 3.0mm x 60° serrated surface.
|
| |
1/16" x 90° Serrated
|
|
The mounting interface between the top jaw and the base jaw is a 1/16" x 90° serrated surface, also referred to as fine serrated.
|
| |
3/32" x 90° Serrated
|
|
The mounting interface between the top jaw and the base jaw is a 3/32" x 90° serrated surface.
|
| |
ACME Key
|
|
The mounting interface between the top jaw and the base jaw is an ACME key style.
|
| |
Square Key
|
|
The mounting interface between the top jaw and the base jaw is a square key style.
|
| |
American Standard Tongue & Groove
|
|
The mounting interface between the top jaw and the base jaw is an American standard tongue & groove style. Tongue & groove style jaws are also referred to as slot and tenon chuck jaws.
|
| |
Dovetail Tongue & Groove
|
|
The mounting interface between the top jaw and the base jaw is an dovetail tongue & groove style.
|
| |
Metric Tongue & Groove
|
|
The mounting interface between the top jaw and the base jaw is an metric tongue & groove style. Tongue & groove style jaws are also referred to as slot and tenon chuck jaws.
|
| |
Specialty / Other
|
|
The mounting interface between the top jaw and the base jaw is specialty, or unlisted design.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Jaw Shapes
|
|
|
| |
Your choices are...
|
|
|
| |
Pointed
|
|
The chuck jaw has a pointed chucking face. Standard included angles for pointed jaws are 60°, 90°, or 120°. Pointed jaws may come to a point on the end or have a small flat. Pointed jaws are used for smaller as well as larger diameter parts.
|
| |
Pie-shaped / Round Jaw
|
|
Pie-shaped jaws (also round jaws) are full grip jaws used for maximum surface contact on large diameter, thin section, and non-cylindrical parts.
|
| |
Standard / Square Nose
|
|
Standard jaws (also referred to as square nose, long, or offset jaws) are soft top jaws with a square face. They are general purpose jaws that can be machined and hardened (if made from steel).
|
| |
Single-step Jaw
|
|
Single-step jaws are hard top jaws with one locating step to rest the work on. Single-step jaws are usually reversible.
|
| |
Two-step Jaw
|
|
Two-step jaws are hard top jaws with two locating step to rest the work on. Two-step jaws are usually reversible.
|
| |
Specialty / Other
|
|
Specialty or other, unlisted or proprietary chuck jaw shape.
|
| |
Search Logic:
|
|
All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
|
|
| |
Quick Change
|
|
Chuck jaw has special mounting features to facilitate quick changing from one jaw to another.
|
| |
Search Logic:
|
|
"Required" and "Must Not Have" criteria limit returned
matches as specified. Products with optional attributes
will be returned for either choice.
|
|
