|
Search other suppliers in the following categories:
|
|
Abrasive discs consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing. They are used for metal removal, surface finishing, sanding, etc.
|
|
Abrasive sheets, rolls or pads consists of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven, sponge or other backing usually with a die cut square or rectangular shape.
|
|
Abrasives and abrasive products are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Abrasives and abrasive products include discs, belts, blast machines and sandblasters, as well as sheets, rolls, and hand pads.
|
|
Bolts are threaded rods or pins that fasten objects together. They usually have a head at one end and a thread at the other. Bolts are secured by threaded nuts, and are available in both metric and non-metric designations.
|
|
Electronic fasteners and hardware are small components for spacing or positioning electronic devices on printed circuit boards.
|
|
Electronics standoffs and electronics ferrules are small components for spacing or positioning electronic devices on printed circuit boards.
|
|
EMI and RFI shielding includes coatings, gaskets, enclosures, sealants, resins and other products or materials that block out electromagnetic interference (EMI) and radio frequency (RF) interference.
|
|
Ferrite beads are used to suppress unwanted signals that can interfere with electrical devices such as DC supplies, transmission lines and cables. They provide attenuation of selected frequency bands.
|
|
Heat sinks are thermally conductive, usually metallic components or devices that absorb and dissipate heat generated by electronic components such as computers. Common heat sink materials include aluminum, copper, and steel.
|
|
IC sockets and headers are board-mounted female connectors that serve as carriers for integrated circuit (IC) chips.
|
|
IC sockets and interconnect components interface or connect a microelectronic semiconductor chip to a board or larger scale device.
|
|
Industrial batteries translate chemical energy into electricity.
|
|
Industrial handles and industrial pulls are hardware components that are grasped by hand and manipulated to perform a service.
|
|
Industrial hinges are jointed devices that allow an attached part, such as a door or window, to swing.
|
|
Industrial pins are cylindrical fasteners that are used to locate, align and join components. They are made out of aluminum, brass, titanium, wood and plastic. Products made from hardened steel, unhardened steel, and stainless steel are also available. Powered industrial pins, that are pneumatically, electrically, or hydraulically actuated, are also available.
|
|
Latches are mechanical components that hold a door, drawer, or cabinet closed. Typically, latches do not lock; however, some latches provide locking features.
|
|
Nuts are fasteners that are designed to fit around and secure a bolt or screw. The application determines the type of nut to use.
|
|
PCB pins and PCB receptacles are electronic interconnect devices for printed circuit boards (PCB). PCB pins are male connectors. PCB receptacles are female connectors.
|
|
Posts, spacers and standoffs are threaded and used in applications where boards, plates, or other items need to be fastened to each other.
|
|
Printing and label stock is blank or pre-printed film, paper or other backing used for the display of printing, lithographing, embossing, hot stamping, stickers, seals, or other written, printed or graphic matter.
|
|
Retaining rings and snap rings are fasteners used to axially position a component on a shaft or in a bore.
|
|
Screws are fasteners that consist of a threaded shaft at one end and, typically, a head at the other. They are inserted into solid materials and secured via rotation.
|
|
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks consist of an insulating body and a clamping device. Their flexibility allows wiring to be centralized and makes it easier to maintain complex control circuits.
|
|
Washers are disks of metal or non-metallic material placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevent leakage, isolate, prevent loosening, or distribute pressure.
|
|
Wire terminals are passive conductors used to facilitate a connection that is not soldered.
|
