|
Search other suppliers in the following categories:
|
|
Digital LED displays are segmented or dot matrix displays allowing for numeric only and alphanumeric character representation.
|
|
Diodes are electronic components that conduct electric current in only one direction, functioning as a one-way valve. Diodes are manufactured using semiconductor materials such as silicon, germanium or selenium and are used as voltage regulators, signal rectifiers, oscillators and signal modulators / demodulators.
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
Electromechanical relays are devices that complete or interrupt a circuit by physically moving electrical contacts into contact with each other.
|
|
IC sockets and interconnect components interface or connect a microelectronic semiconductor chip to a board or larger scale device.
|
|
Lamps are light sources that emit incoherent light for illumination. There are many different types of products. Examples include fluorescent lamps, halogen lamps, heat lamps, incandescent lamps, LED lamps, projection lamps, spectral lamps, and stage lamps. Specialized and proprietary lamps are also available.
|
|
LED lamps are light emitting diode arrays with traditional lamp ballasts.
|
|
Light-emitting diodes (LED) are PN junction devices that give off light radiation when biased in the forward direction. LEDs are used in a wide variety of indication applications.
|
|
Network and communication chips are semiconductor integrated circuits (IC) used in telecommunication devices and systems.
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Rectifier diodes are designed for use in rectification circuits. Rectifiers are used to convert AC to DC.
|
|
Reed switches are magnetically actuated switches. They are typically manufactured with two ferromagnetic reeds (contact blades), which are sealed in a glass capsule. In the presence of a magnet, the blades (contacts) close.
|
|
Resistors and potentiometers are passive electronic components that oppose the flow of either alternating current (AC) or direct current (DC).
|
|
RF amplifiers are devices that accept a varying input signal and produce an output signal that varies in the same way, but with larger amplitude.
|
|
RF and wireless chips are integrated circuits (IC) that are designed specifically for radio frequency (RF), microwave, and other wireless communications or data transmission applications.
|
|
RF receivers are electronic devices that enable a particular radio signal to be separated from all others being received and converted into a format for video, voice, or data.
|
|
RF transceivers are electronic devices that receive and demodulate an RF signal, then modulate and transmit a new signal.
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Thyristors are a class of four-layer (PNPN) semiconductor devices that act as switches, rectifiers, or voltage regulators.
|
|
Transistors are electronic devices made of semiconductor material that amplify a signal or open or close a circuit.
|
|
Triacs are three-terminal silicon devices that are configured in an inverse parallel arrangement to provide load current during both halves of the AC supply voltage. They are often used to control motor speed.
|
