|
Search other suppliers in the following categories:
|
|
Air cylinders are pneumatic linear actuators that are driven by a pressure differential in the cylinder's chambers. They may be single-acting (with a spring return) or double-acting.
|
|
Air pressure regulators control pressure in air lines (usually adjustable) to remove fluctuations and maintain consistent pressure for pneumatic devices.
|
|
Air valves allow metered fluid flow in one or both directions. They are used in pneumatic circuits to regulate the rate of activation or exhaust of cylinders and other pneumatic devices.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Booster pumps are used in applications where the normal system pressure is low and needs to be increased.
|
|
Carbon steels and alloy steels are ferrous alloys that contain carbon and other alloying elements such as manganese, chromium, molybdenum, and nickel.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Control valves or proportional valves are power-operated devices used to modify fluid flow or pressure rate in a process system.
|
|
Ferrous metals and alloys are based on iron and include carbon steels, alloy steels, stainless steels, cast iron, cast steel, maraging steel, and specialty or proprietary iron-based alloys.
|
|
Filter, regulator, lubricator (FRL) assemblies are pre-packaged or modular assemblies of common configurations of air filters, regulators, lubricators, and gauges.
|
|
Hydraulic cylinders are actuation devices that utilize pressurized hydraulic fluid to produce linear motion and force.
|
|
Hydraulic power units provide pressurized flow to hydraulic motors, cylinders, and other components.
|
|
Hydraulic pumps deliver high-pressure fluid flow to the pump outlet. Hydraulic pumps are powered by mechanical energy sources to pressurize fluid.
|
|
Hydraulic valves contain and transfer the flow and pressure of hydraulic fluid in hydraulic power systems. They range from simple shutoff valves to precision control valves.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Industrial silencers and mufflers absorb and attenuate noise levels from machinery and other sources for environmental amelioration and regulatory compliance.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Metal rod and bar stock are metals and alloys in the form of round bars or rod, square bars, rectangular or flat bars, hexagons, and other bar stock shapes.
|
|
Metal shapes and stock includes metals and alloys in the form of bar, rod, beam, plate, foil and other standard shapes.
|
|
Mixing valves combine the flow of two or more inlets into a single outlet for applications such as temperature and concentration control.
|
|
Needle valves are small valves used for flow control in liquid or gas services. The fine threading of the stem and the large seat area allow for precise resistance to flow.
|
|
Noise control products passively control vibrations or noise through absorption or dampening (e.g., mufflers, silencers or baffles).
|
|
Piston pumps and plunger pumps are reciprocating pumps that use a plunger or piston to move media through a cylindrical chamber. The plunger or piston is actuated by a steam powered, pneumatic, hydraulic, or electric drive. Piston pumps and plunger pumps are also called well service pumps, high pressure pumps, or high viscosity pumps.
|
|
Plastic tubing is constructed of many different plastic compounds for flow lines for fluids and gases in pneumatic, hydraulic, process, medical and many other specialized applications.
|
|
Pressure regulators are used to maintain a constant outlet pressure or flow.
|
|
Pressure relief valves are self-actuated safety valves designed to relieve excess pressure upstream from the line.
|
|
Quick couplers are used in a hydraulic or pneumatic system to quickly connect lines without losing fluid or fluid pressure.
|
|
Solenoid valves are devices that use a solenoid to control valve activation.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
