|
Search other suppliers in the following categories:
|
|
AC power connectors transfer alternating current through a variety of electronic devices. AC power connectors include simple AC inlets, outlets, and power entry modules.
|
|
Cable assemblies are collections of wires or cables banded into a single unit with connectors on at least one end.
|
|
Cable ties hold groups of cables together for support and ease of maintenance.
|
|
Capacitors are electronic components used for storing charge and energy. In their simplest form, capacitors consist of two conducting plates separated by an insulating material called the dielectric.
|
|
Circuit breakers are mechanical switching devices capable of breaking currents under specified abnormal circuit conditions.
|
|
Continuous duty linear solenoids convert electrical energy into mechanical power via a plunger with an axial stroke in either a push or pull action. They are rated for a 100% duty cycle.
|
|
Darlington transistors (Darlington pairs) are semiconductor devices that combine two bipolar transistors in a single device. They provide high current gain (commonly written ß) and require less space than configurations that use two discrete transistors.
|
|
Digital counters are integrated circuits used for counting events in computers and other digital systems.
|
|
Digital decoders and digital demultiplexers move data between inputs and outputs. In the case of digital decoders, the coded information is translated into familiar or uncoded formats, while digital multiplexers transmit data from one input through to several output lines.
|
|
Digital latches are logic devices that latch onto or retain digital states (1 or 0) in data storage circuits.
|
|
Digital multiplexers are integrated circuits that route digital information from multiple sources onto a single line for transmission to a common destination.
|
|
Diodes are electronic components that conduct electric current in only one direction, functioning as a one-way valve. Diodes are manufactured using semiconductor materials such as silicon, germanium or selenium and are used as voltage regulators, signal rectifiers, oscillators and signal modulators / demodulators.
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
Electromechanical relays are devices that complete or interrupt a circuit by physically moving electrical contacts into contact with each other.
|
|
Electronic enclosures and instrument enclosures house electronic components and instruments. They are usually designed for handheld or desktop applications.
|
|
Flashlights are portable light sources that use battery, electrical, or mechanical power to illuminate an area or item for inspection.
|
|
Flip-flops are digital logic devices that synchronize changes in output state (1 or 0) according to a clocked input.
|
|
Fuses protect electrical devices and components from overcurrents and short circuits that occur in improperly operating circuits.
|
|
Heat shrink tubing conforms to the size and shape of wires, connections, open coils, and other electrically conductive elements to insulate and protect them from adverse environmental conditions.
|
|
Industrial adhesives consist of hot melt adhesives, epoxy adhesives, polyurethane adhesives, sealants, thermoset adhesives, UV curing adhesives, silicon adhesives, acrylic adhesives and other related industrial products.
|
|
Industrial batteries translate chemical energy into electricity.
|
|
Industrial cooling systems and industrial cooling equipment includes air-to-air, liquid-to-air, and liquid-to-liquid heat exchangers; ducts and/or pipes; and other devices for removing heat from a system that contains a heat source.
|
|
Industrial enclosures are used to house electronic components, equipment and devices. They are designed to protect personnel from accidental injury and to prevent the ingress of environmental contaminants.
|
|
Industrial fans and blowers are designed to move air and/or powders in industrial and commercial settings. Typical applications include air circulation for personnel, exhaust or material handling.
|
|
Light-emitting diodes (LED) are PN junction devices that give off light radiation when biased in the forward direction. LEDs are used in a wide variety of indication applications.
|
|
Logic gates are electronic circuits that combine digital signals according to boolean algebra.
|
|
Metal-oxide semiconductor field-effect transistors (MOSFETs) are electronic switching devices with a conducting channel as the output. An electrode called a gate controls the width of the channel and determines how well the MOSFET conducts.
|
|
Monostable multivibrators, also known as one-shots, are digital devices similar to flip-flops, but with only one stable state where they remain until triggered by an input signal. Once triggered, the output is switched to the opposite state.
|
|
Potentiometers, rheostats and trimmers are three-terminal resistors that are used to measure or divide voltages, and to protect or control circuits.
|
|
Power bipolar transistors are semiconductors in which a base n-type or p-type layer is sandwiched between emitter and collector layers of the opposite type. The junctions between the semiconductor sections amplify weak incoming electrical signals.
|
|
Power connectors transfer AC or DC through a variety of electronic devices and are used in a variety of commercial, industrial, and residential applications. Power connectors range from simple AC or DC inlets and outlets to sophisticated power entry modules
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Rectifier diodes are designed for use in rectification circuits. Rectifiers are used to convert AC to DC.
|
|
Reed switches are magnetically actuated switches. They are typically manufactured with two ferromagnetic reeds (contact blades), which are sealed in a glass capsule. In the presence of a magnet, the blades (contacts) close.
|
|
Resistors are electrical components that oppose the flow of either direct or alternating current. They are used to protect, operate, or control circuits.
|
|
Resistors and potentiometers are passive electronic components that oppose the flow of either alternating current (AC) or direct current (DC).
|
|
RF and microwave connectors are used to connect the ends of cables in systems that operate in the radio frequency (RF) or microwave spectrum. They include threaded or bayonet-style couplings that snap, screw, or push into place.
|
|
RF transistors are designed to handle high-power radio frequency (RF) signals in devices such as stereo amplifiers, radio transmitters, and television monitors.
|
|
Shift registers are sequential logic circuits that are used to store and move data. They accept binary inputs from one serial or parallel source and then shift the data through a chain of flip-flops, one bit at time.
|
|
Signal transformers transfer information from one circuit to another by electromagnetic induction. They are used to increase or decrease the voltage from one side of a power transformer to the other.
|
|
Silicon controlled rectifiers (SCR) are four-layer (PNPN) thyristors with three terminals: an input control terminal (gate), an output terminal (anode), and a terminal common to both the input and output (cathode). SCRs are used mainly with high voltages and currents, often to control alternating current (AC) where the change of sign causes the device to switch off automatically.
|
|
Small-signal bipolar transistors (BJT) are semiconductors that amplify small AC or DC signals. They consist of a base n-type or p-type layer sandwiched between emitter and collector layers of the opposite type.
|
|
Specialty timers are specialty or proprietary products related to timers and timing devices.
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks consist of an insulating body and a clamping device. Their flexibility allows wiring to be centralized and makes it easier to maintain complex control circuits.
|
|
Thyristor surge suppressors are semiconductor chips used to protect circuits and devices from over-voltage and over-current.
|
|
Thyristors are a class of four-layer (PNPN) semiconductor devices that act as switches, rectifiers, or voltage regulators.
|
|
Transient voltage suppressor (TVS) diodes are designed to limit over-voltages. They can dissipate high amounts of transient power in a short period of time.
|
|
Transistors are electronic devices made of semiconductor material that amplify a signal or open or close a circuit.
|
|
Triacs are three-terminal silicon devices that are configured in an inverse parallel arrangement to provide load current during both halves of the AC supply voltage. They are often used to control motor speed.
|
|
Wire and cable harness accessories are used to bundle, clip, clamp, label, guide, and protect wires and cables.
|
|
Wire and connector assembly and installation tools are used to assemble and install connectors.
|
