|
Search other suppliers in the following categories:
|
|
Abrasives and abrasive products are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Abrasives and abrasive products include discs, belts, blast machines and sandblasters, as well as sheets, rolls, and hand pads.
|
|
Boring tools are used to cut or finish the inner diameter of holes.
|
|
Broaches are devices for cut-sizing, in which the tool is forced through the material for precision sizing or surface finishing.
|
|
Burnishing tools are used to impart a gloss or fine surface finish, often in processes that involve the cold working of metal surfaces.
|
|
Calibration and repair services for vibration, acoustic, electrical / electronic test, environmental, dimensional, NDT, analytical, process and other specialty instruments, sensors and related equipment.
|
|
Chuck jaws are inserts that fit into a chuck and grip the workpiece. There are three types of chuck jaws: base jaws, hard jaws, and soft jaws.
|
|
Chucks are attachments used to hold a workpiece or cutting tool on a machine tool. This product area covers a variety of chuck types, including: clamping, collet, core, diaphragm, draw bar, electrostatic, fixturing, gear, grinding, lathe, magnetic, milling, pull down, roll, safety, scroll, speed, spindle, universal, vacuum and woodworking chucks.
|
|
CMM, gage and inspection equipment services provide repair, calibration, upgrade, rebuild, install, training and replacement services.
|
|
Coating services coat or plate the surfaces of manufactured components. Coating processes include ceramic, coil, dip, dry lubricant, phosphate, powder, rubber, thin film, titanium, and selective coating. Coating services also perform chemical finishing, galvanizing, hardfacing, painting, thermal spraying, and screen printing.
|
|
Counterbores are tools for cutting recessed holes in a workpiece, typically on center with a smaller hole. Counterbores are also used for spot facing.
|
|
Cutting tool inserts are replaceable attachments for cutting tools. They typically contain the actual cutting edge.
|
|
Dead centers are used to hold or support a workpiece in a lathe or other machine tool. They do not revolve with the workpiece.
|
|
Deburring tools remove flashing and other unwanted edge properties caused by cutting or machining.
|
|
Dimensional gages and instruments provide quantitative measurements of product or component dimensional and form attributes such as wall thickness, depth, height, length, inner diameter (ID), outer diameter (OD), taper or bore.
|
|
Drill bits are drill accessories that are used as rotary cutting tools for drilling holes.
|
|
Instrument calibration services test equipment and calibrate them to various standards.
|
|
Knurling tools are used to impart a regular surface pattern on the outside of a part for gripping or aesthetic purposes. Often, the imparted pattern is diamond shaped or parallel.
|
|
Lifting slings are material handling accessories for load attachment to lifts, cranes, and hoists.
|
|
Live centers are used to hold or support a workpiece in a lathe or other machine tool, often between the headstock and tailstock. Live centers revolve with the workpiece.
|
Milling cutters are rotating cutters used in machining applications. Common configurations include end mills, face mills, shell mills, and application-specific cutters and geometries. (See Dovetail Cutters products here) |
|
|
Reamers are rotary tools used for light material removal. They are suitable for deburring and sizing the inside diameter (ID) of holes.
|
|
Resurfacing, recoating and refinishing services alter or restore damaged coatings and surfaces to a usable condition.
|
|
Rotary tables are used to position items so that they can be machined, worked, or assembled.
|
|
Saw blades are cutting implements used in conjunction with saws and other cutters.
|
|
Superabrasives and diamond wheels include grinding wheels, abrasive saw blades, wheel dressers, single-point tools, and other products that use diamond or cubic boron nitride (CBM) abrasive grains.
|
|
Surface finishing products and surface finishing equipment are used to refine or roughen a surface to meet surface finish requirements, or to clean, strengthen or prepare the surface for additional processing.
|
|
Taps are used to form or cut female threads on the inside of holes.
|
|
Tool grinding services manufacture, recondition, regrind, and provide special profiling for cutting and machining tools.
|
|
Vibration isolators and machine mounts are used to mount and/or level machines, motors, appliances and other devices that require leveling, vibration dampening, or load distribution.
|
