|
Search other suppliers in the following categories:
|
|
Capacitors are electronic components used for storing charge and energy. In their simplest form, capacitors consist of two conducting plates separated by an insulating material called the dielectric.
|
|
Crystals are naturally occurring materials that can be induced to resonate (vibrate) at an exact frequency. Quartz, a piezoelectric crystal that provides excellent mechanical and electrical stability, acquires a charge when compressed, twisted, or distorted.
|
|
DC-DC converter chips provide a regulated DC voltage output from a different, unregulated input voltage.
|
|
DC-DC converters accept DC input and provide regulated and/or isolated DC output in various applications including computer flash memory, telecommunications equipment, and process control systems.
|
|
Delay lines are devices used to slow down a signal by a time interval in an electrical network. There are two basic delay line technologies: passive and active.
|
|
DIN connectors are high frequency, multi-pin, electrical connectors that meet standards established by Deutsches Institut für Normung (DIN), a German national organization for standardization. The ends of DIN connectors are round, notched, and protected by a metal skirt to ensure that pins line up correctly.
|
|
Edge card connectors are edge-on connectors designed for single-sided or double-sided printed circuit boards (PCBs).
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
IC voltage regulators are three-terminal devices that provide a constant DC output voltage that is independent of the input voltage, output load current, and temperature. IC voltage regulators are used in power supplies that hold their output voltage constant over a wide range of load variations.
|
|
Inductors coils and chokes are passive components that are designed to resist changes in current and store energy in the form of a magnetic field.
|
|
Industrial cooling systems and industrial cooling equipment includes air-to-air, liquid-to-air, and liquid-to-liquid heat exchangers; ducts and/or pipes; and other devices for removing heat from a system that contains a heat source.
|
|
Industrial fans and blowers are designed to move air and/or powders in industrial and commercial settings. Typical applications include air circulation for personnel, exhaust or material handling.
|
|
Modular connectors and RJ connectors are plug-in units used in many networking and telecommunications applications. Registered jack (RJ) connectors are a type of modular connector, which often have protective capabilities such as integrated filters to protect against unwanted signals or some type of magnetics to provide filtering, signal conditioning, and isolation.
|
|
Oscillators are devices that are used to generate repetitive signals. They produce output signals without an input signal. There are two major types of electronic oscillators: harmonic oscillators and relaxation oscillators. Harmonic oscillators produce sine wave outputs. Relaxation oscillators produce non-sine wave outputs such as square wave, rectangular wave, and sawtooth outputs.
|
|
PC card connectors are used to connect computer cards to computers. Examples include PC cards and CompactFlash cards.
|
|
PCB terminal blocks are modular, insulated devices that mount on printed circuit boards (PCBs) and secure two or more wires together. Some have integral pin terminals and mount through holes in the board. Others plug into PCB-mounted pin strips.
|
|
Potentiometers, rheostats and trimmers are three-terminal resistors that are used to measure or divide voltages, and to protect or control circuits.
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Resistors are electrical components that oppose the flow of either direct or alternating current. They are used to protect, operate, or control circuits.
|
|
Resistors and potentiometers are passive electronic components that oppose the flow of either alternating current (AC) or direct current (DC).
|
|
Resonators are frequency-selective electronic circuits that can produce a fixed (resonant) frequency when properly excited. The value of the resonant frequency depends on the circuit’s components (e.g., inductors, resistors, capacitors, crystals, etc.).
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks consist of an insulating body and a clamping device. Their flexibility allows wiring to be centralized and makes it easier to maintain complex control circuits.
|
