|
Search other suppliers in the following categories:
|
|
AC motor drives interface controllers to AC motors. They match the control signals (voltage and power levels) as well as the signal type (analog or digital). They also provide power conversion, amplification, and the sequencing of waveform signals.
|
|
AC motors include single, multiphase, universal, induction, synchronous, and gear motors. They also include servomotors.
|
|
AC servomotors are responsive, high-acceleration motors typically constructed as permanent magnet synchronous motors.
|
|
Aluminum oxide and alumina ceramics have excellent wear characteristics, chemical resistance, compressive strength, high-temperature properties, and dielectric strength.
|
|
Ball screws, lead screws, and ACME screws are used to convert rotary motion or torque into thrust or linear motion.
|
|
Balls and sphere shapes are used for check or ball valves, bearings, or other applications requiring a spherical product. They are fabricated from materials such as carbides, ceramics, sapphire, metals, plastics, rubber and elastomers.
|
|
Brushless motors are synchronous electric motors that have a magnetically (AC induction) or electronically (DC) controlled commutation system instead of a brush-based mechanical commutation system.
|
|
Ceramic balls are rolling, spherical elements that are used in check and ball valves, bearings, and other mechanical devices that provide rotary or linear motion. They can provide higher stiffness, lower thermal expansion, lighter weight, increased corrosion resistance, and higher electrical resistance than comparable steel products.
|
|
Copper, brass and bronze alloys are non-ferrous metals with excellent electrical and thermal conductivity as well as good corrosion resistance, ductility and strength.
|
|
DC motor drives act as the interface and power supply between a motion controller and a DC motor.
|
|
DC motors are most commonly used in variable speed and torque applications. They include brushless and gear motors, as well as servomotors.
|
|
DC servomotors are generally small and powerful for their size, and easy to control. Common types of DC servomotors include brushless or gear motors.
|
|
DC to AC inverters are used for converting direct current (DC) into alternating current (AC). They are also known as DC to AC converters.
|
|
Electric brake and clutch assemblies consist of elements for both the connection and disconnection of shafts (clutch) and for the slowing or stopping of shafts (brake) in equipment drives.
|
|
Electric brakes are assemblies consisting of electrical elements for the slowing or stopping of shafts in equipment drives. Electrical power is required to activate the brake.
|
|
Electrical clutches are assemblies consisting of elements for the connection and disconnection of shafts (clutch) in equipment drives.
|
|
Fabricated plastic parts and semi-finished shapes include molded, cast, extruded and machined parts made from any polymeric materials.
|
|
Gearboxes and gearheads are speed reducers that consist of a set of gears, shafts, and bearings in an enclosed housing. In converting inputs to outputs, they reduce RPM and increase torque.
|
|
Gearmotors consist of an AC or DC motor with an integral gearbox or gear head that steps delivered speed up or down.
|
|
Industrial ceramic materials are non-metallic, inorganic compounds that include oxides, carbides, or nitrides. They have high melting points, low wear resistance, and a wide range of electrical properties.
|
|
Industrial robots are programmable mechanical devices that contain rotary and/or prismatic joints in order to perform precise, repetitive movements. Types of industrial robots include articulated, Cartesian, cylindrical, gantry, parallel (hexapods), SCARA, and spherical.
|
|
Electric linear actuators have an output rod that provides linear motion via a motor driven ball screw, lead screw, or ACME screw assembly. The actuator's load is attached to the end of a screw or rod and is often unsupported.
|
|
Linear bearings are used in applications where a component needs to be moved along a straight line with high accuracy.
|
|
Linear guides and rails provide a smooth, precision, guiding surface on which the rolling element of a linear bearing rides.
|
|
Linear motors generate force only in the direction of travel. They are capable of extremely high speeds, quick acceleration, and accurate positioning.
|
|
Linear shafts are elongated, rod-shaped devices that provide linear or rotary motion for power transmission applications.
|
|
Linear slides are simple linear motion devices composed of a stationary base and a moving carriage. Linear stages are slides with a drive mechanism that provide controlled, precise positioning along a linear axis.
|
|
Machine tool spindles are rotating components used to hold and drive cutting tools or workpieces on lathes, milling machines and other machine tools.
|
|
Mechanical brake and clutch assemblies consist of elements for both the connection and disconnection of shafts (clutch) and for the slowing or stopping of shafts (brake) in equipment drives.
|
|
Mechanical brakes are assemblies consisting of mechanical elements for the slowing or stopping of shafts in equipment drives. Mechanical power is required to activate the brake.
|
|
Mechanical clutches are assemblies consisting of elements for the connection and disconnection of shafts (clutch) in equipment drives.
|
|
Metal balls and spherical shapes are used as check or ball valves, bearings, or other applications. Metal bearing balls are precision ground for ball bearings or other motion systems.
|
|
Metal shapes and stock includes metals and alloys in the form of bar, rod, beam, plate, foil and other standard shapes.
|
|
Motion control software uses advanced algorithms for programming, monitoring, and optimizing digital motion control products.
|
|
Motion control systems contain matched components such as controllers, motor drives, motors, encoders, user interfaces and software. Components in these systems are optimally matched by the manufacturer.
|
|
Motion controllers range from simple linear controllers to complex, user-programmable modules that act as controllers within complex integrated multi-axis motion systems.
|
|
Motor controllers receive supply voltages and provide signals to motor drives that are interfaced to motors. They include a power supply, amplifier, user interface, and position control circuitry.
|
|
Nickel and nickel alloys are non-ferrous metals with high strength and toughness, excellent corrosion resistance, and superior elevated temperature properties.
|
|
Nonferrous metals and nonferrous alloys are not based on iron and include alloys of aluminum, copper, titanium, zinc, nickel, cobalt, tungsten, precious metals, refractory metals.
|
|
Oxide ceramics include alumina, zirconia, silica, aluminum silicate, magnesia and other metal oxide based materials.
|
|
Plastic and rubber balls are sphere shapes that are used as check or ball valves, bearings, and in other applications.
|
|
Plastic bearings are used in wet and corrosive environments, clean environments, areas that are difficult to lubricate, and applications that require non-magnetic bearings.
|
|
Plastic plate, rod and stock shapes include shaped plastic parts and raw plastic stock.
|
|
Polymers and plastic materials are organic, synthetic or processed polymers that are supplied as raw materials or stock shapes. They typically consist of thermoplastic or thermosetting resins and can be made into many forms.
|
|
Precision shafting provides the highest degree of overall accuracy, concentricity, straightness and surface perfection attainable in commercial practice.
|
|
Refractories and high temperature insulation include many different types of ceramic insulation, refractory shapes, and refractory cements.
|
|
Refractory shapes include recasted, preformed or sintered refractory products that are formed prior to installation in furnaces, boilers or other high temperature equipment.
|
|
Rodless cylinders are linear devices that use pressurized fluid to move a load within many power transfer operations.
|
|
Rotary positioning stages are devices with tables or shafts that may be rotated to any angular position. They may be driven or simple slides.
|
|
Sapphire materials and sapphire components consist of a single-crystal, ceramic form of aluminum oxide. They have superior hardness, mechanical and optical properties, and are used in jewel bearings, lasing rods, wear parts, wafer substrates and optics.
|
|
Servo drives provide electrical drive outputs to servo motors in closed-loop motion control systems where position feedback and corrective signals optimize position and speed accuracy.
|
|
Specialty ceramics include nitrides, borides, carbon or graphite and silicides as well as other specialized non-metallic compounds.
|
|
Stepper motor drives power unipolar and bipolar stepper motors in full step, half step, and microstep motion control applications.
|
|
Stepper motors use a magnetic field to move a rotor in small angular steps or fractions of steps. They provide precise positioning and ease of use, especially in low acceleration or static load applications.
|
|
Test stands and test benches are laboratory surfaces upon which devices are tested. They are used for pressure or flow testing of system components, and in many different industries.
|
|
Thermal insulation and fireproofing materials reduce the flow of heat through the thickness of the material. They are typically fiber-based or foam structures prepared from thermally-stable materials.
|
|
Torque limiters and slip clutches automatically slip or disengage the clutch at a predetermined torque.
|
