|
Search other suppliers in the following categories:
|
|
Air compressors are machines that compress air to higher than atmospheric pressures for delivery to pneumatic or robotic tools, industrial equipment, or direct-use applications.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Compressed air dryers utilize technologies such as refrigeration, desiccant adsorption, and membrane filtration to remove contaminants, particularly water, from the air.
|
|
Compressed air filters are used to remove water, oil, oil vapor, dirt, and other contaminants from a compressed air supply.
|
|
Environmental controllers control environmental factors such as temperature, humidity, and air pressure. The environment to control can be an office or workspace, or inside a chamber for testing or process purposes.
|
|
Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.
|
|
Heat exchangers are commonly used in a wide variety of industrial, chemical, and electronics processes to transfer energy and provide required heating or cooling.
|
|
Humidity controllers monitor and maintain proper humidity levels in environmental test applications, food storage areas, and electronic equipment rooms.
|
|
Level controllers monitor, regulate, and control liquid or solid levels in a process.
|
|
Motor starters and contactors are motor-starting devices. They combine a contactor with overload protection and are designed for starting AC or DC motors.
|
|
Power frequency converters take electrical input power at one frequency and voltage and provide electrical output power at a different frequency and at a different or equal voltage.
|
|
Pressure controllers accept input from pressure sensors, transmitters, gauges, and other devices and subsequently control adjustment to the pressure to maintain or achieve the desired pressure level.
|
|
Pressure regulators are used to maintain a constant outlet pressure or flow.
|
|
Pressure switches are actuated by a change in the pressure of a liquid or gas. They activate electromechanical or solid-state switches upon reaching a specific pressure level.
|
|
Pressure transmitters translate the low level output of a sensor or transducer to a higher level signal suitable for transmission to a site where it can be further processed. These devices include pressure sensors, transducers, elements, and instruments.
|
|
Solenoid valves are devices that use a solenoid to control valve activation.
|
|
Temperature controllers accept inputs from temperature sensors or thermometers, and then output a control signal to keep the temperature at the desired level.
|
|
Temperature instruments use contact or noncontact methods to measure temperature. Products include dial, digital, industrial and laboratory thermometers; temperature probes, indicators, and sensors; RTD elements and transmitters; and thermistors, thermocouples, thermopiles, and thermal switches.
|
|
Temperature sensors are measurement devices that infer temperature by sensing some physical characteristic (i.e. resistance, emf or thermal radiation).
|
|
Thermostats and thermal switches are electro-mechanical on/off switches that are activated by temperature changes. They are typically used to control heating and cooling systems.
|
