H&H Industrial Products - Company Profile

Calipers

Calipers typically use a precise slide movement for inside, outside, depth or step measurements. Some caliper types are used for comparing or transferring dimensions.

Find more about Calipers

Collets

Collets are precision, work-holding chucks consisting of a slotted socket that, when tightened, automatically centers around a finished round or specialized stock.

Find more about Collets

Dimensional Gages and Instruments

Dimensional gages and instruments provide quantitative measurements of product or component dimensional and form attributes such as wall thickness, depth, height, length, inner diameter (ID), outer diameter (OD), taper or bore.

Find more about Dimensional Gages and Instruments

Impact Hammers

Impact hammers are used in structural and modal analysis to determine component or system response to impacts of varying amplitude and duration. A hammer with a force transducer in its head is paired with an accelerometer on the component being tested to compare impact and response.

Find more about Impact Hammers

Industrial Presses

Industrial presses use a ram to shear, punch, form or assemble metal or other material by means of cutting, shaping, or combination dies attached to slides. Examples include die cutting machines, forming and bending machines, punch presses, shop presses, sheet metal equipment, stamping presses, and wire forming machines.

Find more about Industrial Presses

Industrial Screwdrivers and Screwfeeders

Industrial screwdrivers and screwfeeders are automated tools that are used to turn screws while providing close control of screw torque. They can be electric or pneumatic and may include features such as torque feedback and controlled stopping.

Find more about Industrial Screwdrivers and Screwfeeders

Milling Cutters

Milling cutters are rotating cutters used in machining applications. Common configurations include end mills, face mills, shell mills, and application-specific cutters and geometries. (See Dovetail Cutters products here) |

Find more about Milling Cutters

Taps

Taps are used to form or cut female threads on the inside of holes.

Find more about Taps

Tool Posts

Tool posts are used to hold cutting tools. They allow for rapid tool changeover and provide a high degree of position repeatability and indexing.

Find more about Tool Posts