|
Search other suppliers in the following categories:
|
|
Battery chargers are devices for charging rechargeable batteries.
|
|
Cable glands are typically single-cable bulkhead modules that allow barrier penetration while providing sealing and strain relief.
|
|
Circuit breakers are mechanical switching devices capable of breaking currents under specified abnormal circuit conditions.
|
|
Clamp meters are ammeters that can measure current without the need to disconnect the wires where the measurement occurs. They provide information about current draw and current continuity in order to help users troubleshoot erratic loads and trends.
|
|
Digital multimeters (or multi-meters) are used to measure electrical quantities such as voltage, current, resistance, frequency, temperature, capacitance, and time period measurements.
|
|
Digital panel meters measure and display processes and electrical variables via an alphanumeric digital readout.
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
Electrical contactors are electrical devices used to switch high power in power circuits. Unlike relays, contactors are normally directly connected to the load (current carrying) circuit.
|
|
Electromechanical relays are devices that complete or interrupt a circuit by physically moving electrical contacts into contact with each other.
|
|
Level controllers monitor, regulate, and control liquid or solid levels in a process.
|
|
Level switches is a generic search form for devices that are used to detect liquid or powder levels, or interfaces between liquids. These level measurements are indicated via an electrical switching action.
|
|
Liquid level switches are used to detect specific liquid levels or interfaces between liquids. These level measurements are indicated via an electrical switching action.
|
|
Motor starters and contactors are motor-starting devices. They combine a contactor with overload protection and are designed for starting AC or DC motors.
|
|
Power rectifiers are electrical devices that convert alternating current (AC) to direct current (DC). They are an integral part of telecom rectifiers for the telecommunications industry, and in battery chargers, DC power systems, and other power system devices.
|
|
Relay sockets are devices that accept relays, electromechanical switches in which the variation of current in one electric circuit controls the flow of electricity in another circuit.
|
|
Rotary switches move in a circle and can stop in several positions. There are two basic styles: single-deck and multi-deck.
|
|
Sanitary pumps are used to transport and meter solutions, slurries, and colloids of food and agricultural materials in operations such as food processing that require cleanliness. There are four basic types of sanitary pumps: centrifugal, positive displacement, jet, and airlift.
|
|
Sewage pumps are used to pump effluents, semi-solids and small solids in liquids.
|
|
Single phase uninterruptible power supplies (UPS) sit between an AC outlet and an electronic device to provide power conditioning, back-up protection, and distribution for electronic equipment loads. They also prevent power disturbances from affecting the performance and life of the electronic device and vital data.
|
|
Solid state relays (SSR) or semiconductor relays are semiconductor devices that can be used in place of mechanical relays to switch electricity to a load in many applications.
|
|
Submersible pumps can be mounted into a tank with the liquid media. The pump’s motor is normally sealed in an oil filled cavity that is protected from contact with the liquid.
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks consist of an insulating body and a clamping device. Their flexibility allows wiring to be centralized and makes it easier to maintain complex control circuits.
|
|
Thermal cutoffs and thermal protectors are nonresetting, thermally sensitive devices designed to protect domestic electrical appliances and industrial equipment from fire. They are sometimes described as thermal one-shot fuses.
|
|
Time delay relays and solid state timers use solid state electronic devices to provide a time delay.
|
|
Uninterruptible power supplies (UPS) are backup batteries that provide emergency power to electrical systems in case power becomes unavailable. They are connected between a power source (such as an electrical outlet) and the equipment to protect (such as a motor or computer).
|
|
Utility pumps are used in many applications such as dewatering low-lying areas, pool covers, and sumps. They are not designed for continuous use.
|
|
Voltage regulators are power converters that provide voltage control capabilities. They accept a voltage that varies over a given range and generate an output voltage that does not vary.
|
|
Warning lights provide a visual indication of a hazardous situation.
|
|
Wastewater pumps are used in the collection of sewage, effluent, drainage and seepage water.
|
|
Wire and cable harness accessories are used to bundle, clip, clamp, label, guide, and protect wires and cables.
|
|
Wire markers and cable markers are used to label wires and cables.
|
|
Wiring ducts are rigid trays typically used as raceways for cables and wires within electrical enclosures.
|
