|
Search other suppliers in the following categories:
|
|
Eye bolts (eyebolts) are threaded bolts with a loop or eye at one end. The eye is used to anchor a cable, rope or chain.
|
|
Hooks are load-transmitting components that are most often used in conjunction with chains and other equipment. Products are designated as eye hooks, clevis hooks, or grab hooks and are used to connect lifting and rigging attachments.
|
|
Hydraulic cylinders are actuation devices that utilize pressurized hydraulic fluid to produce linear motion and force.
|
|
Hydraulic pumps deliver high-pressure fluid flow to the pump outlet. Hydraulic pumps are powered by mechanical energy sources to pressurize fluid.
|
|
Industrial hoists are lifting and pulling devices that use a cable, rope, or chain to move or lift a load. Hoists are primarily used for vertical lifting, and usually have a feature for ceiling mounting such as a hook or trolley mount.
|
|
Industrial winches are pulling devices that use a wire, rope, cable, strap or web to move heavy loads. They typically use a drum or reel for line storage and are either manually operated or powered by an electric, pneumatic, or hydraulic motor.
|
|
Lifting blocks are assemblies that consist of a hook or shackle, swivel, bearing, sheaves, sprockets, pins and frame. They are suspended by a hoisting rope or load chain and are designed for a variety of lifting applications.
|
|
Lifting jacks are used for leveling or positioning heavy equipment, or for supporting structures. They use screw or cylinder-based actuators and are powered by hydraulic, mechanical, electric, or manual methods.
|
|
Lifting slings are material handling accessories for load attachment to lifts, cranes, and hoists.
|
|
Shackles are U-shaped pieces of metal secured with a pin or bolt across the opening, or hinged metal loops that are secured with a quick-release locking mechanism.
|
|
Sheaves are grooved wheels or pulleys used with rope or chain to change the direction and point of application of pulling force.
|
|
Turnbuckles are used in rigging to join wire-rope or cable to an anchor point or other length of wire. They have a screw thread to allow for precise length and tension adjustment.
|
|
Wire rope and mechanical cable is wound from high-strength metal strands for structural, mechanical actuation and motion control applications.
|
|
Wire rope fittings includes clips, sleeves, stud ends, eyes, forks and other hardware used to construct mechanical cable assemblies.
|
