|
Search other suppliers in the following categories:
|
|
Analog pressure gauges are mechanical devices that include bellows, Bourdon tubes, capsule elements and diaphragm element gauges.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Booster pumps are used in applications where the normal system pressure is low and needs to be increased.
|
|
Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.
|
|
Centrifugal pumps consist of a set of rotating vanes, enclosed within a housing or casing, that are used to impart energy to a fluid through centrifugal force.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Chemical pumps are designed for applications requiring greater reliability and durability than conventional pumps.
|
|
Diaphragm pumps use a diaphragm that moves back and forth to transport liquids from one place to another.
|
|
Digital pressure gauges use electronic components to convert applied pressure into usable signals. The gauge readout has a digital numerical display.
|
|
Drains and drain systems are used to capture and remove water to prevent accidents, flooding or other hazardous conditions.
|
|
Faucets are fixtures for drawing or regulating the flow of a liquid, especially from a pipe.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Industrial pipe is a broad category of fluid and solid transport hardware used in many applications and industries. Cylindrical pipe and rigid tube is used in process, energy, construction, and civil infrastructure applications.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Pipe fittings cover many components that connect pipe ends for in-line, offset, multi-port, and mounting configurations.
|
|
Pipe hangers and pipe supports include clevis hangers, beam clamps, pipe clamps, brackets, pipe straps and other accessories that hold pipes in place.
|
|
Plastic valves are made from plastic materials and are used in applications that require corrosion resistance and/or chemical handling.
|
|
Pressure gauges are used for a variety of industrial and application-specific pressure monitoring applications. Uses include visual monitoring of air and gas pressure for compressors, vacuum equipment, process lines and specialty tank applications such as medical gas cylinders and fire extinguishers.
|
|
Pressure regulators are used to maintain a constant outlet pressure or flow.
|
|
Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance
|
|
Sewage pumps are used to pump effluents, semi-solids and small solids in liquids.
|
|
Steam traps are automatic valves that release condensate from a steam space while preventing the loss of live steam. They also remove air and noncondensables from the steam space.
|
|
Submersible pumps can be mounted into a tank with the liquid media. The pump’s motor is normally sealed in an oil filled cavity that is protected from contact with the liquid.
|
|
Sump pumps are used in applications where excess water must be pumped away from a particular area. Sump pumps generally sit in a basin or sump that collects this excess water.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
|
Utility pumps are used in many applications such as dewatering low-lying areas, pool covers, and sumps. They are not designed for continuous use.
|
|
Water pumps are designed to move water that does not contain suspended solids or particulates. Applications include water supply, irrigation, land and mine drainage, sea water desalination, and condensate transport.
|
|
Well pumps are most commonly used to bring water from wells and springs to the surface.
|
