|
Search other suppliers in the following categories:
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Electro-pneumatic transducers convert current or voltage input signals to proportional output pressures. They are used as process control elements in valves, pneumatic relays, and flow regulators for applications such as spray and damper control.
|
|
Electrohydraulic cylinders are actuation devices that use pressurized hydraulic fluid to produce linear motion and force. A hydraulic pump is an integral part of the cylinder design.
|
|
Electrohydraulic valve actuators and hydraulic valve actuators convert fluid pressure supply pressure into motion.
|
|
Filtration media and elements are designed to remove suspended particles from a process stream. This product area includes bulk filter media, cartridges, housing-only products, and housing and filter assemblies.
|
|
Heat exchangers are commonly used in a wide variety of industrial, chemical, and electronics processes to transfer energy and provide required heating or cooling.
|
|
Hose fittings are a category of components used to connect hoses and tubes for in-line, offset, multi-port, and mounting configurations.
|
|
Hydraulic brakes are assemblies consisting of elements for the slowing or stopping of shafts in equipment drives.
|
|
Hydraulic clutches are assemblies consisting of elements for the connection and disconnection of shafts (clutch) in equipment drives.
|
|
Hydraulic cylinders are actuation devices that utilize pressurized hydraulic fluid to produce linear motion and force.
|
|
Hydraulic filters are used for handling petroleum-based oils, emulsions, synthetic hydraulic fluids and lubrication oils.
|
|
Hydraulic hose is used in wide variety of industrial hydraulic systems.
|
|
Hydraulic motors are powered by pressurized hydraulic fluid and transfer rotational kinetic energy to mechanical devices.
|
|
Hydraulic oils and transmission fluids are used to transmit power in hydraulic equipment and power transmission applications.
|
|
Hydraulic power units provide pressurized flow to hydraulic motors, cylinders, and other components.
|
|
Hydraulic pumps deliver high-pressure fluid flow to the pump outlet. Hydraulic pumps are powered by mechanical energy sources to pressurize fluid.
|
|
Hydraulic rotary actuators use a pressurized, incompressible fluid to rotate mechanical components.
|
|
Hydraulic valves contain and transfer the flow and pressure of hydraulic fluid in hydraulic power systems. They range from simple shutoff valves to precision control valves.
|
|
Industrial fluids are used for heat transfer, lubrication, power transmission and other specialized applications.
|
|
Industrial hose covers the broad spectrum of fluid transfer lines. Hose is usually flexible, often reinforced, and available in a wide range of material compositions to cover various hydraulic and pneumatic industrial applications.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Level gauges are industrial meters used to determined the level of a liquid in a fixed storage or process tank
|
|
Level sensors are used to detect liquid or powder levels, or interfaces between liquids. There are two basic level-measurement types: continuous and point or multi-point.
|
|
Liquid level sensors are used to detect liquid levels or interfaces between liquids such as oil and water or liquids and solids.
|
|
Lubricators and lubrication systems are used to apply controlled or metered amounts of lubricant.
|
|
Pneumatic lubricators in compressed air lines atomize oil into aerosol form for injection into the air stream to lubricate downstream pneumatic tools, cylinders, motors, and valves.
|
|
Pneumatic rotary actuators use pressurized air to rotate mechanical components.
|
|
Pneumatic valve actuators adjust valve position by converting air pressure into linear or rotary motion.
|
|
Pressure relief valves are self-actuated safety valves designed to relieve excess pressure upstream from the line.
|
|
Pressure switches are actuated by a change in the pressure of a liquid or gas. They activate electromechanical or solid-state switches upon reaching a specific pressure level.
|
|
Servo drives provide electrical drive outputs to servo motors in closed-loop motion control systems where position feedback and corrective signals optimize position and speed accuracy.
|
|
Solenoid valves are devices that use a solenoid to control valve activation.
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Valve actuators mount on valves and, in response to a signal, move a valve to a desired position using an outside power source.
|
