 |
| Business Type |
Address |
Contact ITS-AUI Incorporated |
|
Distributor
|
ITS-AUI Incorporated
1177 North 15th Street
San Jose, CA 95112
USA
|
Web site
|
|
|
Search other suppliers in the following categories:
|
|
Abrasive belts consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing.
|
|
Abrasive discs consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing. They are used for metal removal, surface finishing, sanding, etc.
|
|
Abrasive grain and finishing media includes crushed grit, metal shot, glass beads or shaped chips for blasting, mass finishing (vibratory or tumbling), bonded wheels, coated abrasives, ball milling, water jet cutting, and other applications.
|
|
Abrasive sheets, rolls or pads consists of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven, sponge or other backing usually with a die cut square or rectangular shape.
|
|
Abrasives and abrasive products are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Abrasives and abrasive products include discs, belts, blast machines and sandblasters, as well as sheets, rolls, and hand pads.
|
|
Blast media and blasting abrasives are consumables used in surface preparation processes, such as sandblasting and peening.
|
|
Ceramic abrasives and media include aluminum oxide, boron carbide, cubic boron nitride (CBN), cerium oxide, fabricated diamond, silicate, silicon carbide, tin oxide, tungsten carbide, zirconia, and other fused or sintered crystalline inorganic materials.
|
|
Cut-off wheels and abrasive saw blades are used to cut bars, stock, pipes and other materials that are made of metal, concrete, or masonry.
|
|
Finishing compounds are used to improve surface finish or flatness. They often consist of fine abrasives in slurry, bar, powder or paste forms.
|
|
Grinders and grinding machines use an abrasive that is bonded to a wheel, belt or disc to remove material and improve surface finish.
|
|
Grinding wheels are used for metal removal, dimensioning, and finishing. They consist of an integral shank, pin, shaft, or mandrel that drives a mounted wheel or blades.
|
|
Metal abrasives include metal shot or balls, cut wire, crushed metal grit, and shaped media for applications such as blasting, ball burnishing, peening, mass finishing (vibratory or tumbling), and deburring. Products are also used in bonded wheels and coated abrasives.
|
|
Metal working lubricants, coolants and fluids are specialized coatings and carriers for metal forming, metal cutting, lapping, polishing, and grinding applications.
|
|
Peening shot and beads are small metal balls or glass beads that are used to impact compressive stresses into part surfaces and to deburr sharp edges without removing material.
|
|
Plastic media and abrasives are used in blasting, tumbling, and other finishing processes. Plastic blast media allows removal of paints or organic coating without abrading the underlying metal substrate.
|
|
|
