|
Search other suppliers in the following categories:
|
|
Adhesive dispensing equipment is used for the controlled dispensation of adhesives and/or silicones. These devices include manual dispensing caulk guns, hot melt glue guns, and an assortment of mix / meter and dispensing systems.
|
|
Compressed air filters are used to remove water, oil, oil vapor, dirt, and other contaminants from a compressed air supply.
|
|
Dispensing valve systems are designed to provide precise fluid dispensing depending on applications. The dispensed output can be a bead, dot, flat spray, round spray, or fill (potting). The type of dispensing pattern from dispensing valve systems is determined by valve design and is dependent on dispensed fluid properties.
|
|
Dosing pumps are low-volume fluid pumps with controllable discharge rates used to inject additives into the mixing or pumping system.
|
|
Fluid dispensing equipment includes all manner of devices that dispense, mix and dispense, or mix, meter and dispense fluid media.
|
|
Hose fittings are a category of components used to connect hoses and tubes for in-line, offset, multi-port, and mounting configurations.
|
|
Industrial containers are used for containing materials, shipping and storage. These containers include bags, basins, bins, boxes, buckets, crates, cylinders, drums, IBCs, tanks, and ISO containers.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Industrial robots are programmable mechanical devices that contain rotary and/or prismatic joints in order to perform precise, repetitive movements. Types of industrial robots include articulated, Cartesian, cylindrical, gantry, parallel (hexapods), SCARA, and spherical.
|
|
Industrial storage products include cabinets, containers, coolers, carousels, garages, hoppers, lockers, mezzanines, racks, shelves, shelters, storage tanks, and walk-in enclosures.
|
|
Manifolds and manifold systems are fluid-distribution devices. They range from simple supply chambers with several outlets to multi-chambered flow control units including integral valves and interfaces to electronic networks.
|
|
Metering pumps are precision pumps, which dispense an exact amount of material. They are used in a variety of chemical dosing and metering applications.
|
|
Nozzles alter and control the stream or spray pattern of a fluid in a spray coating or dispensing system.
|
|
Peristaltic pumps use rotating rollers pressed against special flexible tubing to create a pressurized flow.
|
|
Positive displacement pumps use a mechanical force such as gears, bladders, pistons, plungers or diaphragms to push liquid through and out of the pump.
|
|
Positive displacement valves are precision dispensing devices designed to provide precise fluid dispensation depending on applications. They function by opening quickly, releasing product, and closing again.
|
|
Precision dispensing needle valves are designed to provide precise fluid dispensing depending on applications. The dispensed output can be in the form of a bead, dot or fill. The valve dispenses fluid when the activator (for example, air) acts on a piston, which shifts the spool or needle into the open position.
|
|
Pressure vessels are boilers and storage tanks that contain liquids or gases and are designed to operate at pressures above 15 psig.
|
|
Quick couplers are used in a hydraulic or pneumatic system to quickly connect lines without losing fluid or fluid pressure.
|
|
Single component diaphragm valves are designed to provide a precise fluid supply depending on the application. The dispensed output can be a bead, dot or fill
|
|
Storage tanks and process tanks are bulk containers of varying size and configuration.
|
|
Syringes utilize a cylinder and plunger for precise delivery of liquids or gases in analytical, medical, pharmaceutical or biotechnology applications. Many times needles are included with the syringe.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
