|
Search other suppliers in the following categories:
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Gas valves are used to handle and control the flow of gaseous media such as liquefied petroleum and natural gas. They are made of metal or plastic and vary in terms of valve size, pressure rating, number of ports, and flow.
|
|
Gaskets are used to prevent fluid or gas leaks by providing a barrier between two mating surfaces.
|
|
Gate valves and knife valves are linear motion valves in which a flat closure element slides into the media stream to shut off flow.
|
|
Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.
|
|
Industrial pipe is a broad category of fluid and solid transport hardware used in many applications and industries. Cylindrical pipe and rigid tube is used in process, energy, construction, and civil infrastructure applications.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Pipe fittings cover many components that connect pipe ends for in-line, offset, multi-port, and mounting configurations.
|
|
Pipe hangers and pipe supports include clevis hangers, beam clamps, pipe clamps, brackets, pipe straps and other accessories that hold pipes in place.
|
|
Pressure relief valves are self-actuated safety valves designed to relieve excess pressure upstream from the line.
|
|
Specialty or proprietary products and accessories related to pipes, tubes, hoses, and fittings.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
