|
Search other suppliers in the following categories:
|
|
AC power sources provide alternating power and typically have adjustable output values for the testing of component response at various voltages, current and frequency levels.
|
|
Battery and fuel cell test equipment consists of specialized test stations, stands or systems, monitors and component modules for performance or endurance testing.
|
|
Computer power supplies convert alternating current (AC) line to direct current (DC) line, needed by the computer.
|
|
Continuity testers are electrical test instruments that are used to determine if an electrical circuit exists between two points.
|
|
Current leakage testers measure the amount of current that leaks to ground.
|
|
DC power supplies accept an input power and output the desired form of DC power. Common types of DC power supplies include linear power supplies, switching power supplies, DC-DC converters, and silicon controlled rectifier (SCR) type power supplies.
|
|
Digital multimeters (or multi-meters) are used to measure electrical quantities such as voltage, current, resistance, frequency, temperature, capacitance, and time period measurements.
|
|
Digital voltmeters are instruments that measure voltage or voltage drop in a circuit. They use solid-state components and display values digitally.
|
|
Electrical safety testers are instruments used to test diverse electrical safety such as testing outlet polarity, line voltage level, ampere rating, medical equipment, and others.
|
|
Electric test probes are used to establish a connection between a circuit under test and the measuring instrument.
|
|
Electronic loads and load banks are used to test electrical and electronic equipment. They mimic load requirements for testing and troubleshooting purposes.
|
|
Electrostatic Discharge (ESD) Generators are test equipments that are use to generate ESD signals that are used for testing how much ESD electronic equipment can stand without damage.
|
|
EMC Testers are devices used to test or monitor parts and products for electromagnetic compatibility (EMC).
|
|
Ground bond testers are electrical safety test devices that perform electrical compliance tests.
|
|
High voltage power supplies use linear technology to provide one or more DC outputs at voltage levels of hundreds or thousands of volts.
|
|
Hipot testers are electrical safety test devices that perform a variety of electrical compliance tests.
|
|
Linear power supplies accept AC inputs and provide one or more DC outputs for a wide variety of computer and industrial applications. They use an active element (normally a power transistor) operating in its linear region to generate a desired voltage.
|
|
Modeling and simulation software is used to model and simulate a system or process for the purposes of testing or calibration.
|
|
Power supplies are devices that produce AC or DC power. This grouping includes current sources, DC power supplies, AC-DC adapters, DC-DC converters, AC power sources, and DC-AC inverters.
|
|
Resistors are electrical components that oppose the flow of either direct or alternating current. They are used to protect, operate, or control circuits.
|
|
Resistors and potentiometers are passive electronic components that oppose the flow of either alternating current (AC) or direct current (DC).
|
|
Signal generators and waveform generators are used to test and align all types of transmitters and receivers, to measure frequency and to generate a signal, waveform or noise source. Signal generators can use AC energy, audio frequency (AF) and radio frequency (RF) to function.
|
|
Switching power supplies are DC sources that use a switching element (normally a power transistor) to generate the desired voltage. Switching power supplies are also called switch-mode products or switching mode power supplies (SMPS).
|
|
Test, inspection and measurement software is used to design, automate and implement the testing of instruments and equipment, and the measurement of device parameters.
|
