|
Search other suppliers in the following categories:
|
|
Air valves allow metered fluid flow in one or both directions. They are used in pneumatic circuits to regulate the rate of activation or exhaust of cylinders and other pneumatic devices.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Bolts are threaded rods or pins that fasten objects together. They usually have a head at one end and a thread at the other. Bolts are secured by threaded nuts, and are available in both metric and non-metric designations.
|
|
Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.
|
|
Centrifugal pumps consist of a set of rotating vanes, enclosed within a housing or casing, that are used to impart energy to a fluid through centrifugal force.
|
|
Condensate pumps are used to collect and transport condensate back into a steam system for reheating and reuse, or to remove unwanted condensate from an HVAC or appliance collection pan.
|
|
Coolant systems pump liquids to cool and lubricate workpieces and cutting tools.
|
|
Edge finders are tools used to locate the edge of a workpiece during machine setup operations. Edge finders can be simple, mechanical tools, or electrically activated devices.
|
|
Eye bolts (eyebolts) are threaded bolts with a loop or eye at one end. The eye is used to anchor a cable, rope or chain.
|
|
Fixture keys are used to accurately locate fixtures or machine components. Typically, they are assembled into a hole or a machined slot.
|
|
Fluid transfer pump systems are used in processing, water purification and desalination, or liquid handling applications.
|
|
Fluorescent lamps are high-efficiency lamps that use electrical discharge through low-pressure mercury vapor to produce ultraviolet (UV) energy, which is then transformed into visible light.
|
|
Guide bushings and drill bushings are used to guide drills, punches, pillars or other tools.
|
|
Hand tools are manually-operated tools that fit in the hand.
|
|
High intensity discharge lamps (HID) contain compact arc tubes, which enclose various gases and metal salts, operating at relatively high pressures and temperatures. HID lamps are often used as UV light sources.
|
|
Hydraulic valves contain and transfer the flow and pressure of hydraulic fluid in hydraulic power systems. They range from simple shutoff valves to precision control valves.
|
|
Incandescent lamps generate light by passing an electric current through a thin filament wire (usually of tungsten) until the wire is extremely hot.
|
|
Industrial fluids are used for heat transfer, lubrication, power transmission and other specialized applications.
|
|
Industrial handles and industrial pulls are hardware components that are grasped by hand and manipulated to perform a service.
|
|
Industrial knobs are small, usually round, devices that are designed for use on industrial machinery, electronic components, and metal cabinetry. They are usually made out of metal, plastic, or rubber and are available in a variety of sizes, colors, and finishes.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Industrial pins are cylindrical fasteners that are used to locate, align and join components. They are made out of aluminum, brass, titanium, wood and plastic. Products made from hardened steel, unhardened steel, and stainless steel are also available. Powered industrial pins, that are pneumatically, electrically, or hydraulically actuated, are also available.
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Lamps are light sources that emit incoherent light for illumination. There are many different types of products. Examples include fluorescent lamps, halogen lamps, heat lamps, incandescent lamps, LED lamps, projection lamps, spectral lamps, and stage lamps. Specialized and proprietary lamps are also available.
|
|
Locating and fixturing pins are removable devices used to locate, align or fix two or more parts together. They can accomplish this manually using a simple pin, or by pneumatic, hydraulic or electrical power in a more complex device.
|
|
Nuts are fasteners that are designed to fit around and secure a bolt or screw. The application determines the type of nut to use.
|
|
Power tools include a wide range of devices for fabrication, assembly, construction, and repair. They are usually motor-driven.
|
|
Rest buttons and rest pads are used to provide a surface to locate or support a component in a jig or fixture.
|
|
Screws are fasteners that consist of a threaded shaft at one end and, typically, a head at the other. They are inserted into solid materials and secured via rotation.
|
|
Sight windows are an effective and economical way of viewing tank, pressure vessel and piping systems interiors. They are also referred to as sight glasses.
|
|
Spring loaded devices include spring plungers, ball plungers, retractable plungers, and spring stops.
|
|
Stencil machines cut or print fonts and symbols on materials and substrates. They are used to create stencils for marking applications, or to print stencils for SMT applications.
|
|
Studs are mechanical fasteners which are threaded on one or both ends. One end is secured to an object. The other end is used typically with a nut.
|
|
Threaded rod is a fastening bar or rod threaded along its length.
|
|
Washers are disks of metal or non-metallic material placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevent leakage, isolate, prevent loosening, or distribute pressure.
|
