|
Search other suppliers in the following categories:
|
|
AC motor drives interface controllers to AC motors. They match the control signals (voltage and power levels) as well as the signal type (analog or digital). They also provide power conversion, amplification, and the sequencing of waveform signals.
|
|
AC servomotors are responsive, high-acceleration motors typically constructed as permanent magnet synchronous motors.
|
|
Calibration and repair services for vibration, acoustic, electrical / electronic test, environmental, dimensional, NDT, analytical, process and other specialty instruments, sensors and related equipment.
|
|
Cantilever pumps are centrifugal pumps used in sump pump applications. They are available in horizontal and vertical configurations. Many styles including submersible motors.
|
|
Centrifugal pumps consist of a set of rotating vanes, enclosed within a housing or casing, that are used to impart energy to a fluid through centrifugal force.
|
|
Chemical pumps are designed for applications requiring greater reliability and durability than conventional pumps.
|
|
Coating services coat or plate the surfaces of manufactured components. Coating processes include ceramic, coil, dip, dry lubricant, phosphate, powder, rubber, thin film, titanium, and selective coating. Coating services also perform chemical finishing, galvanizing, hardfacing, painting, thermal spraying, and screen printing.
|
|
DC motor drives act as the interface and power supply between a motion controller and a DC motor.
|
|
DC motors are most commonly used in variable speed and torque applications. They include brushless and gear motors, as well as servomotors.
|
|
DC servomotors are generally small and powerful for their size, and easy to control. Common types of DC servomotors include brushless or gear motors.
|
|
Diaphragm pumps use a diaphragm that moves back and forth to transport liquids from one place to another.
|
|
Double diaphragm pumps are positive displacement pumps that compress fluid by decreasing the volume of a chamber containing the fluid.
|
|
Equipment repair services provide in-house or on-site repair and refurbishment services.
|
|
Gear repair and gearbox repair services repair gears, gearboxes and speed reducers.
|
|
Gear pumps use intermeshing gears to pump various types of liquids. Typically, one gear is the driver and the other is free wheeling. The gears have very tight tolerances so that the fluid being pumped cannot pass through them. Common uses for gear pumps include high pressure, metering, and flow control applications.
|
|
Gearboxes and gearheads are speed reducers that consist of a set of gears, shafts, and bearings in an enclosed housing. In converting inputs to outputs, they reduce RPM and increase torque.
|
|
Gearmotors consist of an AC or DC motor with an integral gearbox or gear head that steps delivered speed up or down.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Machine shop services use machinery or equipment to perform custom removal of material to fabricate a finished part.
|
|
Magnetic drive pumps are sealless pumps that use a coaxial magnetic coupling to transmit torque to an impeller. A standard electric motor drives a set of permanent magnets that are mounted on a carrier or drive assembly.
|
|
Mechanical brakes are assemblies consisting of mechanical elements for the slowing or stopping of shafts in equipment drives. Mechanical power is required to activate the brake.
|
|
Metering pumps are precision pumps, which dispense an exact amount of material. They are used in a variety of chemical dosing and metering applications.
|
|
Motor controllers receive supply voltages and provide signals to motor drives that are interfaced to motors. They include a power supply, amplifier, user interface, and position control circuitry.
|
|
Motor repair services rebuild and refurbish used motors. Some have cleanrooms and testing facilities, and certifications from ISO and OEMs.
|
|
Plastic pumps are designed to move fluids that would corrode or damage other types of pumps. They provide broad chemical resistance and are less costly and lighter in weight than metal pumps.
|
|
Positive displacement pumps use a mechanical force such as gears, bladders, pistons, plungers or diaphragms to push liquid through and out of the pump.
|
|
Power transformers convert power-level voltages from one level or phase configuration to another. They can include features for electrical isolation, power distribution, and control and instrumentation applications.
|
|
Pump repair services repair and rebuild used pumps.
|
|
Self-priming pumps create and maintain a sufficient vacuum level to draw fluid with no external assistance
|
|
Servo drives provide electrical drive outputs to servo motors in closed-loop motion control systems where position feedback and corrective signals optimize position and speed accuracy.
|
|
Spindle repair services specialize in the repair and rebuilding of spindles, rotating components that are used to hold and drive cutting tools or work pieces on lathes, milling machines, and other machine tools.
|
|
Tachometers are used to measure the velocity of a rotating object. They operate on the principle that a driven motor (i.e., a motor operated as a generator) produces a voltage that is proportional to the angular velocity of the motor shaft.
|
|
Test equipment and instrument repair services test and repair industrial equipment and instruments. They specialize in the test and repair of acoustic and vibration equipment, electrical and electronic test equipment, laboratory equipment and instruments, inspection instruments or non-destructive testing (NDT) equipment, or specialty testing equipment and instruments.
|
|
Water pumps are designed to move water that does not contain suspended solids or particulates. Applications include water supply, irrigation, land and mine drainage, sea water desalination, and condensate transport.
|
