|
Search other suppliers in the following categories:
|
|
Communications and network software is used for the setup and management of digital communication networks such as LAN and WAN computer networks, electronic mail, FAX, audio and video networks, wireless communication systems, etc.
|
|
Data acquisition is the digitizing and processing of multiple sensor or signal inputs for the purpose of monitoring, analyzing and/or controlling systems and processes. Signal conditioning includes the amplification, filtering, converting, and other processes required to make sensor output suitable for rereading by computer boards.
|
|
Data acquisition input modules accept sensor and other signal output for data acquisition systems. They may include signal conditioning prior to the analog-to-digital conversion stage.
|
|
Data acquisition software is designed to collect, record, store, present and analyze data collected from sensors and other digital devices.
|
|
Network bridges connect one network to another so that terminals on both networks can communicate as if on a single network.
|
|
Network equipment is used to split, switch, boost, or direct packets of information along a network. This product area includes network hubs, switches, routers, bridges, gateways, multiplexers, transceivers and firewalls. Often, network equipment is defined by is protocol or port type (e.g., Ethernet switch, USB hub).
|
|
Network gateways interconnect networks with different, incompatible communication protocols.
|
|
Network routers are protocol-dependent devices that connect subnetworks. They are also used to break down a large network into smaller subnetworks.
|
|
Network transceivers, short for transmitter-receiver, are devices that both transmit and receive analog or digital signals.
|
|
Networking repeaters regenerate incoming electrical, wireless or optical signals to preserve signal integrity and extend the distance over which data can travel. They are often used to connect cable segments in IEEE 802.3 networks.
|
|
Pressure transmitters translate the low level output of a sensor or transducer to a higher level signal suitable for transmission to a site where it can be further processed. These devices include pressure sensors, transducers, elements, and instruments.
|
|
RF repeaters have independent paths for reception and transmission, through which they collect and send signals to antennas and other stations.
|
|
RF transceivers are electronic devices that receive and demodulate an RF signal, then modulate and transmit a new signal.
|
|
RF transmitters are electronic devices consisting of an oscillator, modulator, and other circuits that produce an RF signal.
|
|
Resistance temperature detector (RTD) temperature transmitters convert RTD resistance measurements to current signals, eliminating the problems inherent in RTD signal transmission via lead resistance.
|
|
Sensor transmitters are measurement or signal conditioning packages that provide a standard, calibrated output from a sensor or transducer in the form of a current loop output (e.g., 4-20 mA).
|
|
Signal conditioning products provide amplification, filtering, converting, and other processes required to make sensor output suitable for reading by computer boards.
|
|
Telemetry receivers and telemetry transmitters are data acquisition components used to gather information from remote locations via wireless communication.
|
|
Temperature instruments use contact or noncontact methods to measure temperature. Products include dial, digital, industrial and laboratory thermometers; temperature probes, indicators, and sensors; RTD elements and transmitters; and thermistors, thermocouples, thermopiles, and thermal switches.
|
|
Temperature signal conditioners accept outputs from temperature measurement devices such as resistance temperature detectors (RTDs), thermocouples, and thermistors. They then filter, amplify, and/or convert these outputs to digital signals, or to levels suitable for digitization.
|
