|
Search other suppliers in the following categories:
|
|
Abrasive belts consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing.
|
|
Abrasive discs consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing. They are used for metal removal, surface finishing, sanding, etc.
|
|
Abrasive sheets, rolls or pads consists of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven, sponge or other backing usually with a die cut square or rectangular shape.
|
|
Abrasives and abrasive products are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Abrasives and abrasive products include discs, belts, blast machines and sandblasters, as well as sheets, rolls, and hand pads.
|
|
Air compressors are machines that compress air to higher than atmospheric pressures for delivery to pneumatic or robotic tools, industrial equipment, or direct-use applications.
|
|
Air cylinders are pneumatic linear actuators that are driven by a pressure differential in the cylinder's chambers. They may be single-acting (with a spring return) or double-acting.
|
|
Air pressure regulators control pressure in air lines (usually adjustable) to remove fluctuations and maintain consistent pressure for pneumatic devices.
|
|
Anchors are used to attach an object to a support structure. Common types include concrete anchors, expansion anchors, floor anchors, wall anchors, and specialty anchors.
|
|
Ball transfers are conveyors that use fixed balls to transport products and materials by rolling. Ball transfer units are ball transfer components that consist of a large, load-bearing ball which sits atop smaller balls inside of a hemispherical cup.
|
|
Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.
|
|
Bolts are threaded rods or pins that fasten objects together. They usually have a head at one end and a thread at the other. Bolts are secured by threaded nuts, and are available in both metric and non-metric designations.
|
|
Boring tools are used to cut or finish the inner diameter of holes.
|
|
Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.
|
|
Casters are complete wheel and horn assemblies which, when attached to a piece of equipment, allow it to move.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Collets are precision, work-holding chucks consisting of a slotted socket that, when tightened, automatically centers around a finished round or specialized stock.
|
|
Compressed air dryers utilize technologies such as refrigeration, desiccant adsorption, and membrane filtration to remove contaminants, particularly water, from the air.
|
|
Compressed air filters are used to remove water, oil, oil vapor, dirt, and other contaminants from a compressed air supply.
|
|
Control valves or proportional valves are power-operated devices used to modify fluid flow or pressure rate in a process system.
|
|
Conveyor belts are used in a wide variety of material transport applications such as manufacturing, food processing, and heavy industry. Belt construction and belt materials are often application-specific.
|
|
Conveyor components and accessories are the parts that are related to and compose a conveyor system.
|
|
Counterbores are tools for cutting recessed holes in a workpiece, typically on center with a smaller hole. Counterbores are also used for spot facing.
|
|
Countersinks are tools used for cutting angled holes or countersinks in a workpiece.
|
|
Cut-off wheels and abrasive saw blades are used to cut bars, stock, pipes and other materials that are made of metal, concrete, or masonry.
|
|
Cutting tool inserts are replaceable attachments for cutting tools. They typically contain the actual cutting edge.
|
|
Degreasers and degreasing equipment remove grease, oil, lubricants or other organic films from parts using aqueous cleaners or solvent vapors.
|
|
Diamond tools and wheel dressers are used to condition, true and dress grinding wheels. Dressing is the process of re-sharpening the tiny cutting edges on a grinding wheel’s surface.
|
|
Digital readouts are specialized displays for position and dimension readings from inspection gages and linear scales, or rotary encoders on machine tools.
|
|
Dimensional gages and instruments provide quantitative measurements of product or component dimensional and form attributes such as wall thickness, depth, height, length, inner diameter (ID), outer diameter (OD), taper or bore.
|
|
Dock equipment covers all items that assist in the loading and unloading of materials from trucks to buildings. Dock equipment categories include dock boards, dock bumpers, dock seals, dock levelers, dock lights, dock shelters, dock doors, dock restraints, dock guides, and dock chocks.
|
|
Drill bits are drill accessories that are used as rotary cutting tools for drilling holes.
|
|
Drilling machines and tapping machines are used to drill or thread holes in a surface.
|
|
Epoxy adhesives are chemical compounds for joining components. They require clean surfaces and are valued for their toughness and resistance to chemical and environmental damage.
|
|
Eye bolts (eyebolts) are threaded bolts with a loop or eye at one end. The eye is used to anchor a cable, rope or chain.
|
|
Eyewear includes safety devices, such as safety goggles, worn to protect the eyes.
|
|
Face shields are safety devices designed to protect the face from debris or other hazards.
|
|
Fall arrest systems prevent personnel from falling in construction sites, factories, etc.
|
|
Filtration media and elements are designed to remove suspended particles from a process stream. This product area includes bulk filter media, cartridges, housing-only products, and housing and filter assemblies.
|
|
Flap wheels and specialty abrasives includes cartridge rolls, cross pads, sleeves, unitized or convolute wheels, interleaved flaps, flap discs and other specialized abrasive products converted from coated or nonwoven abrasives.
|
|
Floor coatings are tough protective layers used in applications where heavy surface wear or corrosion is expected. Typical applications include warehouses, chemical plants, and manufacturing floors.
|
|
Gate valves and knife valves are linear motion valves in which a flat closure element slides into the media stream to shut off flow.
|
|
Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.
|
|
Grinders and grinding machines use an abrasive that is bonded to a wheel, belt or disc to remove material and improve surface finish.
|
|
Grinding wheels are used for metal removal, dimensioning, and finishing. They consist of an integral shank, pin, shaft, or mandrel that drives a mounted wheel or blades.
|
|
Hand tools are manually-operated tools that fit in the hand.
|
|
Helmets and hardhats are safety devices that protect the head from falling debris and other hazards.
|
|
Hose clamps and band clamps are used to secure pipe, hose, tubing and mating circular parts together. Parts include worm drive hose clamps and profiled v-band clamps.
|
|
Hydraulic filters are used for handling petroleum-based oils, emulsions, synthetic hydraulic fluids and lubrication oils.
|
|
Indicators and comparators measure where the linear movement of a precision spindle or probe is amplified.
|
|
Industrial adhesives consist of hot melt adhesives, epoxy adhesives, polyurethane adhesives, sealants, thermoset adhesives, UV curing adhesives, silicon adhesives, acrylic adhesives and other related industrial products.
|
|
Industrial carts and industrial trucks are used to transport equipment or materials. There are many different types of products.
|
|
Industrial coatings are thin films deposited upon materials to add or enhance desired properties, such as color, conductivity, corrosion resistance, etc.
|
|
Industrial floor mats include rubber mats and matting, modular floor mat systems, and other matting for traction, impact protection, worker ergonomics and comfort. They can include functional features such as ESD protection.
|
|
Industrial hoists are lifting and pulling devices that use a cable, rope, or chain to move or lift a load. Hoists are primarily used for vertical lifting, and usually have a feature for ceiling mounting such as a hook or trolley mount.
|
|
Industrial lubricants are oils, fluids, greases and other compounds designed to reduce friction, binding or wear and exclude moisture. Specialized characteristics may enhance thermal conduction across thermal interfaces or reduce electrical resistivity across electrical joints.
|
|
Industrial pins are cylindrical fasteners that are used to locate, align and join components. They are made out of aluminum, brass, titanium, wood and plastic. Products made from hardened steel, unhardened steel, and stainless steel are also available. Powered industrial pins, that are pneumatically, electrically, or hydraulically actuated, are also available.
|
|
Industrial pipe is a broad category of fluid and solid transport hardware used in many applications and industries. Cylindrical pipe and rigid tube is used in process, energy, construction, and civil infrastructure applications.
|
|
Industrial screwdrivers and screwfeeders are automated tools that are used to turn screws while providing close control of screw torque. They can be electric or pneumatic and may include features such as torque feedback and controlled stopping.
|
|
Industrial shelving and racking is used to store items packed in totes, boxes, or cases.
|
|
Industrial storage products include cabinets, containers, coolers, carousels, garages, hoppers, lockers, mezzanines, racks, shelves, shelters, storage tanks, and walk-in enclosures.
|
|
Lathes and turning centers cut a rotating part with a stationary cutting tool. The tool moves parallel and perpendicular to the workpiece axis to provide the desired finished shape.
|
|
Lifts are used to raise and lower material, personnel, vehicles, and workpieces for loading and working positioning.
|
|
Metal working lubricants, coolants and fluids are specialized coatings and carriers for metal forming, metal cutting, lapping, polishing, and grinding applications.
|
Milling cutters are rotating cutters used in machining applications. Common configurations include end mills, face mills, shell mills, and application-specific cutters and geometries. (See Dovetail Cutters products here) |
|
|
Non-destructive testing (NDT) supplies and accessories are used to detect, inspect, and measure flaws, bond integrity, and other material conditions without permanently altering or destroying the examined part or product.
|
|
Nuts are fasteners that are designed to fit around and secure a bolt or screw. The application determines the type of nut to use.
|
|
Pipe fittings cover many components that connect pipe ends for in-line, offset, multi-port, and mounting configurations.
|
|
Quarter-turn plug valves use a cylindrical or tapered plug with a hole in the center to control straight through flow when in the open position.
|
|
Polishers and buffing machines are used to impart a fine (low Ra) surface finish on the exterior of a part. To improve surface finish, they use use abrasive grain slurries or compounds on buffs, bobs, cloth naps, laps, very fine grit nonwovens, and coated abrasives.
|
|
Power tools include a wide range of devices for fabrication, assembly, construction, and repair. They are usually motor-driven.
|
|
Press brakes and bending machines are used to bend and fold metal by pressing it into a die.
|
|
Quick couplers are used in a hydraulic or pneumatic system to quickly connect lines without losing fluid or fluid pressure.
|
|
Reamers are rotary tools used for light material removal. They are suitable for deburring and sizing the inside diameter (ID) of holes.
|
|
Respirators and Dust Masks protect the wearer from inhalation of harmful contaminants.
|
|
Retaining rings and snap rings are fasteners used to axially position a component on a shaft or in a bore.
|
|
Rivets are headed pins with a point that passes through two pieces of material. Beating or pressing down the point causes it to spread out and form a second head. Rivets can be used to connect two plates or pieces of material together.
|
|
Safety gloves are protective garments worn that are worn over the hands for protection against dangerous or harmful environments.
|
|
Sanders and sanding machines are used to finish wood, plastic or composites through the application of abrasive belts, discs or sheets.
|
|
Saw blades are cutting implements used in conjunction with saws and other cutters.
|
|
Sawing machines and cut-off machines are used to cut raw materials to specified lengths or sizes.
|
|
Screws are fasteners that consist of a threaded shaft at one end and, typically, a head at the other. They are inserted into solid materials and secured via rotation.
|
|
Shears and shearing equipment use a shearing or scissor-like action to cut metal into sheets or strips.
|
|
Specialty adhesives, sealants and compounds are specialized and/or proprietary products with unique chemistries, cure technologies and/or compositions.
|
|
Taps are used to form or cut female threads on the inside of holes.
|
|
Thickness gages are used to make precise dimensional measurements on a wide variety of coatings and materials including steel, plastic, glass, rubber, ceramics, paint, electroplated layers, enamels, etc
|
|
Thread gages are dimensional instruments for measuring and/or verifying thread size, pitch or other parameters.
|
|
Thread lockers and retainers render threaded fasteners immovable. They are used mainly with devices that are subject to transverse and axial loads that may lead to vibrational loosening.
|
|
Threading dies are used to form or cut male threads on the outside of rod or bars.
|
|
Tool holders (toolholders) are the physical interface between tooling and the machine tool. They vary in terms of machine-mount styles and are designed to perform specific applications.
|
|
Tube fittings connect runs of tubing for in-line, offset, multi-port, and mounting configurations to other tubing sections, pipe, hose, and other fluid transfer components.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
|
Vises are used for work holding and during inspection, assembly, forming, welding, and machining operations. They usually consist of a screw, level, or cam-type mechanism that closes and holds two or more jaws around a workpiece
|
|
Washers are disks of metal or non-metallic material placed beneath a nut, an axle bearing, or a joint, to relieve friction, prevent leakage, isolate, prevent loosening, or distribute pressure.
|
