|
Search other suppliers in the following categories:
|
|
Automated test equipment (ATE) is used to monitor and control test and measurement devices, keeping human interaction at a minimum.
|
|
Automation equipment and system integrators provide equipment and solutions for automating manufacturing processes.
|
|
Calibration and repair services for vibration, acoustic, electrical / electronic test, environmental, dimensional, NDT, analytical, process and other specialty instruments, sensors and related equipment.
|
|
Camera lenses and video lenses attach to video cameras for use in machine vision, quality monitoring, security, and remote monitoring for industrial and commercial operations. This search form does not cover consumer video camera lenses.
|
|
Charge coupled device (CCD) cameras contain light-sensitive silicon chips that detect electrons excited by incoming light. They also contain micro circuitry that transfers a detected signal along a row of discrete picture elements or pixels, scanning the image very rapidly. CCD cameras use two-dimensional CCD arrays with many thousand of pixels.
|
|
CMM, gage and inspection equipment services provide repair, calibration, upgrade, rebuild, install, training and replacement services.
|
|
Complementary metal oxide semiconductor (CMOS) cameras use image sensors that operate at lower voltages than charged coupled devices (CCDs), reducing power consumption for portable applications. Each CMOS active pixel sensor cell has its own buffer amplifier, and can be addressed and read individually.
|
|
Coordinate measuring machines (CMMs) are mechanical systems designed to move a measuring probe to determine the coordinates of points on a work piece surface.
|
|
Digital and video microscopes are instruments that use digital technology to magnify images of objects. They include built-in cameras and a series of high-powered lenses that provide superior image quality and resolution.
|
|
Dimensional and profile scanners gather two-dimensional (2D) or three-dimensional (3D) information about an object.
|
|
Dimensional gages and instruments provide quantitative measurements of product or component dimensional and form attributes such as wall thickness, depth, height, length, inner diameter (ID), outer diameter (OD), taper or bore.
|
|
Flaw detectors are nondestructive testing instruments that can detect or measure defects in raw materials or finished products.
|
|
Frame grabbers are image processing computer boards that capture and store image data for industrial applications such as quality control.
|
|
Hardness testers measure a material's resistance to indentation. This calculation is determined by measuring the permanent depth or projected area of the indentation.
|
|
High speed cameras are designed for rapid image acquisition for scientific or industrial analysis of rapidly changing or moving processes.
|
|
Illuminators are used to provide adequate contrast for imaging. Illuminators include backlights, LED illuminators, and fiber optic illuminators.
|
|
Image analysis software is used to enhance, identify or quantify features in an image by breaking down or applying digital image filters.
|
|
Imaging workstations are vision systems used for metrology or image analysis in laboratory and cleanroom settings.
|
|
Linear slides are simple linear motion devices composed of a stationary base and a moving carriage. Linear stages are slides with a drive mechanism that provide controlled, precise positioning along a linear axis.
|
|
Low light cameras are designed for low light applications. They contain sensors that are highly sensitive to light and reduce images to a series of lines.
|
|
Machine vision software is used to control and drive machine vision systems.
|
|
Machine vision systems are used for automated inspection and measurement in production environments.
|
|
Measuring microscopes are used by toolmakers for measuring the properties of tools. These microscopes are often used for dimensional measurement with lower magnifying powers to allow for brighter, sharper images combined with a wide field of view.
|
|
Microscope accessories and microscope supplies are used with many different types of microscopes, including dissection or stereoscopic, compound, and confocal devices.
|
|
Microscope stages are platforms where specimens are placed for observation with a microscope. They are often equipped with a mechanical device which holds the specimen slide in place, but allows the back-and-forth and side-to-side movement of the slide.
|
|
Microscopes are instruments that produce magnified images of small objects
|
|
Non-destructive testing (NDT) supplies and accessories are used to detect, inspect, and measure flaws, bond integrity, and other material conditions without permanently altering or destroying the examined part or product.
|
|
Nondestructive testing (NDT) probes and sensors include eddy current, ultrasonic, induction, hall effect and EMAT and other specialized transducers.
|
|
Optical and light microscopes use the visible or near-visible portion of the electromagnetic spectrum to magnify images of objects.
|
|
Optical comparators are instruments that project a magnified image or profile of a part onto a screen for comparison to a standard overlay profile or scale.
|
|
Optical lens assemblies are composed of a number of lenses mounted for a particular imaging function. These can include objectives, collimators, gauging lenses, etc.
|
|
Particle analyzers are used to determine the physical makeup of individual particulates in aerosols, dispersion, emulsions, powders, and other samples.
|
|
Quality assurance and compliance software is used to test and inspect products and processes. These software packages are designed for activities such as compliance monitoring, project management, and product or system certification.
|
|
Scanning software is used with optical and document scanners or with other imaging equipment to digitize, create, edit and evaluate images.
|
|
Scientific imagers are high resolution systems used to capture moving or still images.
|
|
Semiconductor metrology instruments are designed for wafer and thin film in-line inspection after semiconductor processing. They include capacitance gages, C-V systems, electron beam probes, ellipsometers, interferometers, I-V system, magnetometers, optical systems, profilometers, reflectometers, resistance probes, RHEED systems, and X-ray diffractometers.
|
|
Specialty or proprietary gages, instruments or gaging systems for dimensional measurement.
|
|
Telecentric lenses are used to provide images independent of an object’s distance, or to prevent wide ranges of angles of incidence. There are three basic types of telecentric lenses: object-space, image-space, and double telecentric.
|
|
Test, inspection and measurement software is used to design, automate and implement the testing of instruments and equipment, and the measurement of device parameters.
|
|
Thickness gages are used to make precise dimensional measurements on a wide variety of coatings and materials including steel, plastic, glass, rubber, ceramics, paint, electroplated layers, enamels, etc
|
|
Video cameras take continuous pictures and generate signals for display or recording. They capture images by breaking them down into a series of lines. This search form does not include consumer devices such as camcorders.
|
|
Videoscopes are inspection tools that capture images from inside holes, bores or cavities.
|
|
Vision sensors are machine vision video cameras with integrated signal processing and imaging electronics. They typically include program and data interfaces.
|
|
Instruments such as quartz crystal microbalance (QCM) monitors, ellipsometers, RHEED systems, imaging stations, CD-SEMs, ion mills, C-V systems specifically designed for wafer metrology or in-situ monitoring of thin film parameters during thin film or semiconductors wafer processing.
|
