|
Search other suppliers in the following categories:
|
|
Abrasive belts consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing.
|
|
Abrasive discs consist of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven or other backing. They are used for metal removal, surface finishing, sanding, etc.
|
|
Abrasive grain and finishing media includes crushed grit, metal shot, glass beads or shaped chips for blasting, mass finishing (vibratory or tumbling), bonded wheels, coated abrasives and other applications.
|
|
Abrasive, grinding and finishing accessories include holders, back-up pads, mandrels, contact wheels, polishing naps and other components used to apply abrasive products.
|
|
Abrasive sheets, rolls or pads consists of abrasive grain adhered onto the surface of a cloth, film, paper, non-woven, sponge or other backing usually with a die cut square or rectangular shape.
|
|
Abrasives and abrasive products are used to remove surface materials such as metal, ceramics, glass, plastics, and paint. Abrasives and abrasive products include discs, belts, blast machines and sandblasters, as well as sheets, rolls, and hand pads.
|
|
AC motor drives interface controllers to AC motors. They match the control signals (voltage and power levels) as well as the signal type (analog or digital). They also provide power conversion, amplification, and the sequencing of waveform signals.
|
|
AC motor starters are used to turn-on and turn-off electric motors and motor-controlled equipment. They use solid-state or electromechanical technologies, and are designed for single-phase or three-phase motors.
|
|
AC motors include single, multiphase, universal, induction, synchronous, and gear motors. They also include servomotors.
|
|
AC power connectors transfer alternating current through a variety of electronic devices. AC power connectors include simple AC inlets, outlets, and power entry modules.
|
|
AC power cords carry alternating current from one area to another. There are many different standard plugs and voltages, depending upon the country.
|
|
AC power sources provide alternating power and typically have adjustable output values for the testing of component response at various voltage, current and frequency levels.
|
|
AC-DC adapters accept AC input voltage directly from a wall outlet, and output DC voltage.
|
|
Acrylic adhesives and acrylate adhesives provide excellent environmental resistance and fast-setting times when compared to other resins systems. They are created by p olymerizing acrylic or methylacrylic acids through a reaction with a suitable catalyst.
|
|
Adhesive dispensing equipment is used for the controlled dispensation of adhesives and/or silicones. These devices include manual dispensing caulk guns, hot melt glue guns, and an assortment of mix / meter and dispensing systems.
|
|
Adhesive tapes and films temporarily or permanently join materials together.
|
|
Adjustable speed drives alter the speed of a driven shaft to a speed selected by an operator.
|
|
Aftercoolers are heat exchangers for cooling the discharge from a compressor.
|
|
Air cleaners re-circulate, filter and purify air for process and environmental applications.
|
|
Air compressors are machines that compress air to higher than atmospheric pressures for delivery to pneumatic or robotic tools, industrial equipment, or direct-use applications.
|
|
Air cylinders are pneumatic linear actuators that are driven by a pressure differential in the cylinder's chambers. They may be single-acting (with a spring return) or double-acting.
|
|
Air handlers are a system-like device used in ventilating systems. They typically consist of a blower, heat exchange medium for heat or air conditioning, and housing.
|
|
Air heaters are devices used to heat air. They include forced air products as well as all types of radiant and space heaters.
|
|
Air hose is used in pneumatic systems and controls, or as supply lines for pneumatic devices and tools.
|
|
Air valves allow metered fluid flow in one or both directions. They are used in pneumatic circuits to regulate the rate of activation or exhaust of cylinders and other pneumatic devices.
|
|
Air velocity flow sensors measure air velocity or volume flow using insertion probes or capture hoods.
|
|
Aluminum framing systems are modular systems assembled from extruded aluminum profiles and accessories that are used to construct machine frames, enclosures, jigs, conveyors and many other products.
|
|
Analog ammeters are metered instruments that measure current flow in amperes. They display current levels on a dial, usually with a moving pointer or needle.
|
|
Analog panel meters measure and display processes and electrical variables with a simple dial display.
|
|
Analog pressure gauges are mechanical devices that include bellows, Bourdon tubes, capsule elements and diaphragm element gauges.
|
|
Anchors are used to attach an object to a support structure. Common types include concrete anchors, expansion anchors, floor anchors, wall anchors, and specialty anchors.
|
|
Angular contact bearings are designed so that a contact angle between the races and the balls is formed when the bearing is in use.
|
|
Annunciators and graphic display panels disclose the layout and annunciate the status and measurement parameters of industrial processes, security and fire alarms of buildings and manufacturing facilities, power distribution networks, and other operations.
|
|
English roller chain sprockets engage chains in many different power transmission and conveyor systems. Sprockets and chains are often an economic, reliable drive system for long running, continuous drive applications with limited shock and torque loads. English sprockets are classified according to ANSI number designations.
|
|
Audio transducers and buzzers are used in electronic equipment, toys and various warning devices as the sounding component.
|
|
Ball bearings are used to provide smooth, low friction motion in rotary applications. Ball bearings types include radial ball bearings (deep groove and angular contact) and thrust ball bearings.
|
|
Ball milling and grinding media are designed for ball milling and the grinding down of bulk, powder or granular materials into finer powder forms or disperse pigments in a resin or coating.
|
|
Ballasts are power supplies or transformers for fluorescent lamps.
|
|
Battery chargers are devices for charging rechargeable batteries.
|
|
Battery packs are constructed from two or more individual cells or batteries.
|
|
Battery and fuel cell test equipment consists of specialized test stations, stands or systems, monitors and component modules for performance or endurance testing.
|
|
Belt and chain tensioners apply and maintain correct tension on power transmission drive systems.
|
|
Blast media and blasting abrasives are consumables used in surface preparation processes, such as sandblasting and peening.
|
|
Bolts are threaded rods or pins that fasten objects together. They usually have a head at one end and a thread at the other. Bolts are secured by threaded nuts, and are available in both metric and non-metric designations.
|
|
Bonded abrasives consist of conventional abrasive grains held together in a matrix of glass, resin, rubber or other binders. This classification includes grinding wheels, cut-off wheels, honing stones, mounted points and grinding segments.
|
|
Booster pumps are used in applications where the normal system pressure is low and needs to be increased.
|
|
Bore and ID gages are designed for internal diameter dimensional measurement or assessment.
|
|
Boring tools are used to cut or finish the inner diameter of holes.
|
|
Breathing and ventilation air systems provide reliable and safe air supply sources to workers in hazardous industrial environments.
|
|
Bumpers are elastomeric hardware devices used for edge protection, cushioning, and impact absorption.
|
|
Busways and busbars (conductor bars) provide current to distant or moving points along the path of an electrification system.
|
|
Cable carriers are constructed of flexible links and are used to organize and manage cables and hoses for moving applications.
|
|
Cable clamps are used to bundle, clip, clamp, label, guide, and protect wires and cables.
|
|
Cable reels are used for storage, unwinding, and winding of conductive cable or lifting cable. Electric cable reels have contacts for maintaining live power during winding.
|
|
Cable ties hold groups of cables together for support and ease of maintenance.
|
|
Cable trays are rigid-type trays used as raceways for cables and wires.
|
|
Calibration instruments use electrical signals or physical quantities to calibrate sensors and meters. Devices that produce electrical signals can serve as precise meters for sensor calibration, or send output signals to other devices.
|
|
Calipers typically use a precise slide movement for inside, outside, depth or step measurements. Some caliper types are used for comparing or transferring dimensions.
|
|
Capacitance meters measure the value of capacitance in circuit elements.
|
|
Capacitance testers are used to test the capabilities and performance of capacitors.
|
|
Cartridge heaters are cylindrical devices generally inserted into a heated substance.
|
|
Casings and liners are thin flexible sheets, usually made of plastic or fabric, used for wrapping or lining.
|
|
Casters are complete wheel and horn assemblies which, when attached to a piece of equipment, allow it to move.
|
|
Caulk, grout and joint compounds are used to fill joints, level surfaces and seal or repair cracks.
|
|
Centrifugal pumps consist of a set of rotating vanes, enclosed within a housing or casing, that are used to impart energy to a fluid through centrifugal force.
|
|
Chart recorders and strip charts are data acquisition tools used to generate a plot, graph or other visualization of data versus time.
|
|
Paper recording charts and consumables consist of circular charts, strip charts, markers, fanfolds, sheets, pens, and pen arms used in chart and strip recording instruments.
|
|
Chemical additives and agents include a wide range of materials added to polymer resins, paints and coatings, or adhesives to modify specific processing or end-use properties.
|
|
Chemical pumps are designed for applications requiring greater reliability and durability than conventional pumps.
|
|
Chucks are attachments used to hold a workpiece or cutting tool on a machine tool. This product area covers a variety of chuck types, including: clamping, collet, core, diaphragm, draw bar, electrostatic, fixturing, gear, grinding, lathe, magnetic, milling, pull down, roll, safety, scroll, speed, spindle, universal, vacuum and woodworking chucks.
|
|
Circuit breakers are mechanical switching devices capable of breaking currents under specified abnormal circuit conditions.
|
|
Circuit protection devices are used to protect electronic components from unwanted transients such as current and voltage surges, electrostatic discharge (ESD), lightning, spikes and other signals that can imperil the operation or damage the component.
|
|
Clamps, clips and staples are accessories used to hold cables and wires together as one unit.
|
|
Cleaning agents and surface treatments includes liquid cleaners, degreasers, strippers, passivators, etchants, solutions and additives for cleaning and surface preparation.
|
|
Coating and spray booths are enclosures used to contain spray coating processes such as painting, powder coating, thermal spraying, and other deposition methods. This category includes hoods, cabinets, tunnels and similar enclosures
|
|
Coating equipment is used to apply organic, inorganic or metal coatings onto part surfaces for industrial applications.
|
|
Coil heaters and cable heaters are heating elements formed from straight (uncoiled) segments of round or square heating cable.
|
|
Combustion analyzers and flue gas analyzers measure the gas content of emissions in order to monitor the combustion efficiency of fuel-burning equipment.
|
|
Compressed air dryers utilize technologies such as refrigeration, desiccant adsorption, and membrane filtration to remove contaminants, particularly water, from the air.
|
|
Compressed air filters are used to remove water, oil, oil vapor, dirt, and other contaminants from a compressed air supply.
|
|
Conductivity meters, dissolved solids meters, and resistivity meters are analytical instruments that measure the conductivity, dissolved solids, and/or resistivity of a liquid sample.
|
|
Connection heads, also referred to as thermoheads or thermocouple heads, provide a means for connecting temperature sensors and extension wires.
|
|
Control valves or proportional valves are power-operated devices used to modify fluid flow or pressure rate in a process system.
|
|
Conveyor components and accessories are the parts that are related to and compose a conveyor system.
|
|
Coolant systems pump liquids to cool and lubricate workpieces and cutting tools.
|
|
Counterbores are tools for cutting recessed holes in a workpiece, typically on center with a smaller hole. Counterbores are also used for spot facing.
|
|
Countersinks are tools used for cutting angled holes or countersinks in a workpiece.
|
|
Industrial covers, tarps and wraps are used to protect machinery, pallets, and building materials from exposure to weather, sunlight, and other environmental conditions. Covers can be rigid or flexible.
|
|
Current leakage testers measure the amount of current that leaks to ground.
|
|
Current transformers are used to step down current in a very predictable fashion with respect to current and phase. They are generally used as inputs to current instruments.
|
|
Cut-off wheels and abrasive saw blades are used to cut bars, stock, pipes and other materials that are made of metal, concrete, or masonry.
|
|
Cyanoacrylate adhesives are one-part acrylate adhesives that cure instantly on contact with mated surfaces through a reaction with surface moisture. Cyanoacrylates are often called super glues.
|
|
Diffusers and grilles are used to control and direct airflow in heating, ventilation, and air conditioning (HVAC) systems.
|
|
Data acquisition is the digitizing and processing of multiple sensor or signal inputs for the purpose of monitoring, analyzing and/or controlling systems and processes. Signal conditioning includes the amplification, filtering, converting, and other processes required to make sensor output suitable for rereading by computer boards.
|
|
Data loggers and data recorders acquire digital data from sensors and other signals. They are primarily used to store data for subsequent downloads to a host PC, but may also include real-time features such as monitors and alarms.
|
|
DC motor drives act as the interface and power supply between a motion controller and a DC motor.
|
|
DC motors are most commonly used in variable speed and torque applications. They include brushless and gear motors, as well as servomotors.
|
|
DC power supplies accept an input power and output the desired form of DC power. Common types of DC power supplies include linear power supplies, switching power supplies, DC-DC converters, and silicon controlled rectifier (SCR) type power supplies.
|
|
DC to AC inverters are used for converting direct current (DC) into alternating current (AC). They are also known as DC to AC converters.
|
|
Deburring equipment removes burrs, smoothes parting lines, rounds off sharp edges and radiuses corners.
|
|
Deburring tools remove flashing and other unwanted edge properties caused by cutting or machining.
|
|
Depth gages are used to measure of the depth of holes, cavities, or other component features.
|
|
Diamond tools and wheel dressers are used to condition, true and dress grinding wheels. Dressing is the process of re-sharpening the tiny cutting edges on a grinding wheel’s surface.
|
|
Digital multimeters (or multi-meters) are used to measure electrical quantities such as voltage, current, resistance, frequency, temperature, capacitance, and time period measurements.
|
|
Digital panel meters measure and display processes and electrical variables via an alphanumeric digital readout.
|
|
Digital pressure gauges use electronic components to convert applied pressure into usable signals. The gauge readout has a digital numerical display.
|
|
Digital resistance meters are instruments that measure electrical resistance. They use solid-state components and display values digitally.
|
|
Digital voltmeters are instruments that measure voltage or voltage drop in a circuit. They use solid-state components and display values digitally.
|
|
Dimensional gages and instruments provide quantitative measurements of product or component dimensional and form attributes such as wall thickness, depth, height, length, inner diameter (ID), outer diameter (OD), taper or bore.
|
|
Disposable primary batteries are replaced once the energy supply is depleted. Their energy is produced when the materials within the battery react and are exhausted.
|
|
Diverter valves direct flow from one inlet to one of two or more outlets.
|
|
Dock equipment covers all items that assist in the loading and unloading of materials from trucks to buildings. Dock equipment categories include dock boards, dock bumpers, dock seals, dock levelers, dock lights, dock shelters, dock doors, dock restraints, dock guides, and dock chocks.
|
|
Doors are swinging or sliding barriers that can be opened or closed to allow or deny entry.
|
|
Drilling and tapping machines are used to drill or thread holes in a surface.
|
|
Duct heaters are used to heat moving gas streams.
|
|
Dumpers, tilters and inverters are used to reposition or empty material handling containers.
|
|
Dust collectors are used in many processes to either recover valuable granular solid or powder from process streams or to remove granular solid pollutants from exhaust gases prior to venting to the atmosphere.
|
|
Ear protection safety devices are designed to protect the ears from elevated decibel levels and/or debris.
|
|
Edge finders are tools used to locate the edge of a workpiece during machine setup operations. Edge finders can be simple, mechanical tools, or electrically activated devices.
|
|
Electric brake and clutch assemblies consist of elements for both the connection and disconnection of shafts (clutch) and for the slowing or stopping of shafts (brake) in equipment drives.
|
|
Electric brakes are assemblies consisting of electrical elements for the slowing or stopping of shafts in equipment drives. Electrical power is required to activate the brake.
|
|
Electrical clutches are assemblies consisting of elements for the connection and disconnection of shafts (clutch) in equipment drives.
|
|
Electrical brushes and brush materials are used in conjunction with slip rings, commutators or other contact surfaces to maintain an electrical connection in rotary and linear sliding contact applications.
|
|
Electrical conduits and fittings are lengths of solid tubing used to house, protect, and cover electrical wiring and cables in power distribution systems.
|
|
Electrical connectors are devices that join electrical circuits together. Male connectors plug into receptacles, jacks, and outlets. Female connectors contain sockets to receive other devices.
|
|
Electrical contact and electrode materials are soft, high conductivity, oxidation resistant materials used in circuit breakers, relays, and for EDM applications.
|
|
Electrical current sensors measure AC and/or DC current levels. They receive current inputs and provide outputs as analog voltage signals, analog current levels, switches, or audible signals.
|
|
Electrical power generators transform mechanical energy into electrical energy, typically for backup or emergency power. Generators can produce either AC or DC power and are typically powered by a fuel engine.
|
|
Electrical receptacles, outlets, and wall sockets accept plugs and provide current to run electrical devices.
|
|
Electrical safety testers are instruments used to test diverse electrical safety such as testing outlet polarity, line voltage level, ampere rating, medical equipment, and others.
|
|
Electromechanical counters and electromechanical timers accept inputs to operate mechanical display, such as rotating wheels or knobs.
|
|
Electromechanical relays are devices that complete or interrupt a circuit by physically moving electrical contacts into contact with each other.
|
|
Electronic counters and electronic timers are completely electronic units for performing a variety of counter or timer functions.
|
|
Enclosure air conditioners remove the heat generated by electronic devices from the inside of cabinets or enclosures. They typically use refrigerants and include thermostatic controls to maintain programmed environmental conditions.
|
|
Enclosure and rack accessories are products and components for industrial, electronic, and computer racks and enclosures.
|
|
Engines and components are used to convert energy into mechanical force and motion for automotive and industrial applications.
|
|
Epoxy adhesives are chemical compounds for joining components. They require clean surfaces and are valued for their toughness and resistance to chemical and environmental damage.
|
|
Extension springs are designed to oppose spring extension and/or provide return force to devices with extended positions.
|
|
Eye nuts (eyenuts) are fasteners with a looped head. They are designed to receive a hook or rope.
|
|
Eye bolts (eyebolts) are threaded bolts with a loop or eye at one end. The eye is used to anchor a cable, rope or chain.
|
|
Eyewear includes safety devices, such as safety goggles, worn to protect the eyes.
|
|
Face shields are safety devices designed to protect the face from debris or other hazards.
|
|
Fall arrest systems prevent personnel from falling in construction sites, factories, etc.
|
|
Faucets are fixtures for drawing or regulating the flow of a liquid, especially from a pipe.
|
|
Filling machines and packing machines fill containers such as bags, bottles, and cans with a predetermined volume of product, such as food, cosmetics, or medicine.
|
|
Filter, regulator, lubricator (FRL) assemblies are pre-packaged or modular assemblies of common configurations of air filters, regulators, lubricators, and gauges.
|
|
Filtration media and elements are designed to remove suspended particles from a process stream. This product area includes bulk filter media, cartridges, housing-only products, and housing and filter assemblies.
|
|
Finishing compounds are used to improve surface finish or flatness. They often consist of fine abrasives in slurry, bar, powder or paste forms.
|
|
Fixed gages are designed to access a specific attribute based on comparative gaging.
|
|
Fixturing clamps and set-up clamps are used for machine set up, and or tool / part fixturing.
|
|
Flange mounted bearings are used when a shaft axis is perpendicular to the bearing mounting surface. They are available in 2, 3, or 4-hole configurations.
|
|
Flap wheels and specialty abrasives includes cartridge rolls, cross pads, sleeves, unitized or convolute wheels, interleaved flaps, flap discs and other specialized abrasive products converted from coated or nonwoven abrasives.
|
|
Flashlights are portable light sources that use battery, electrical, or mechanical power to illuminate an area or item for inspection.
|
|
Flexible couplings connect rotating members while allowing some degree of angular or parallel misalignment.
|
|
Flexible heaters are devices that can be molded to the shape of a heated object.
|
|
Floor locks are mechanical components with an adjustable-height pad. They prevent portable equipment from rolling
|
|
Flow meters (flowmeters) and flow sensors are devices used for measuring the flow rate or quantity of a moving fluid or gas.
|
|
Fluid dispensing equipment includes all manner of devices that dispense, mix and dispense, or mix, meter and dispense fluid media.
|
|
Fluid power controls and systems use pressurized, moving fluids within an enclosed circuit to generate, transmit, and control power.
|
|
Fluid transfer pump systems are used in processing, water purification and desalination, or liquid handling applications.
|
|
Fluorescent lamps are high-efficiency lamps that use electrical discharge through low-pressure mercury vapor to produce ultraviolet (UV) energy, which is then transformed into visible light.
|
|
Frequency counters are digital indicating meters for accurate measurement and display of square wave and pulse input signals.
|
|
Frequency meters are instruments that provide analog outputs as frequencies that vary as a function of the applied input. They display values on a dial, usually with a needle or moving pointer.
|
|
Fuse holders are devices for containing, protecting and mounting fuses. Blown fuses can be changed quickly and easily when used in conjunction with a fuse holder.
|
|
Fuses protect electrical devices and components from overcurrents and short circuits that occur in improperly operating circuits.
|
|
Gage blocks are manufactured to precise gagemaker tolerance grades for calibrating, checking, and setting fixed and comparative gages.
|
|
Gas and air instruments detect, monitor or analyze gases present in an environment.
|
|
Gas valves are used to handle and control the flow of gaseous media such as liquefied petroleum and natural gas. They are made of metal or plastic and vary in term |
