Wenzhou Industrial Products Import & Export Co., Ltd. - Company Profile

Ball Valves

Ball valves provide tight shut-off and characterizable control. They have high rangeability due to the design of the regulating element, without the complications of side loads typical of butterfly or globe valves.

Find more about Ball Valves

Butterfly Valves

Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.

Find more about Butterfly Valves

Check Valves

Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves. 

Find more about Check Valves

Gate Valves

Gate valves and knife valves are linear motion valves in which a flat closure element slides into the media stream to shut off flow.

Find more about Gate Valves

Globe Valves

Globe valves are linear motion valves with rounded bodies, from which their name is derived.  They are widely used in industry to regulate fluid flow in both on/off and throttling service. 

Find more about Globe Valves

Industrial Valves

Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.

Find more about Industrial Valves

Plug Valves

Quarter-turn plug valves use a cylindrical or tapered plug with a hole in the center to control straight through flow when in the open position.

Find more about Plug Valves

Strainers

Strainers are placed in-line with process piping to remove large solid contaminants from the flow.  Strainers can be cleaned and reused.

Find more about Strainers