|
Search other suppliers in the following categories:
|
|
Absolute rotary encoders use optical, mechanical, or magnetic indexing for angular measurement. They do not lose their position after power-down, but instead provide absolute position upon power-up without requiring a home cycle or any shaft rotation.
|
|
AC motor drives interface controllers to AC motors. They match the control signals (voltage and power levels) as well as the signal type (analog or digital). They also provide power conversion, amplification, and the sequencing of waveform signals.
|
|
AC motors include single, multiphase, universal, induction, synchronous, and gear motors. They also include servomotors.
|
|
Air heaters are devices used to heat air. They include forced air products as well as all types of radiant and space heaters.
|
|
Air velocity flow sensors measure air velocity or volume flow using insertion probes or capture hoods.
|
|
Analog pressure gauges are mechanical devices that include bellows, Bourdon tubes, capsule elements and diaphragm element gauges.
|
|
Band heaters are ring-shaped heaters that clamp onto a cylindrical object and heat via conductive heat transfer.
|
|
Capacitive proximity sensors detect the presence or proximity of a target using capacitive technology.
|
|
Cartridge heaters are cylindrical devices generally inserted into a heated substance.
|
|
Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.
|
|
Circuit breakers are mechanical switching devices capable of breaking currents under specified abnormal circuit conditions.
|
|
Circulation heaters are used to heat moving or circulating fluids.
|
|
Control panels are used to receive inputs, trigger outputs, and monitor systems and instrumentation. They are used in a variety of industrial, manufacturing and process control applications.
|
|
Data acquisition is the digitizing and processing of multiple sensor or signal inputs for the purpose of monitoring, analyzing and/or controlling systems and processes. Signal conditioning includes the amplification, filtering, converting, and other processes required to make sensor output suitable for rereading by computer boards.
|
|
Data loggers and data recorders acquire digital data from sensors and other signals. They are primarily used to store data for subsequent downloads to a host PC, but may also include real-time features such as monitors and alarms.
|
|
DC motor drives act as the interface and power supply between a motion controller and a DC motor.
|
|
DC motors are most commonly used in variable speed and torque applications. They include brushless and gear motors, as well as servomotors.
|
|
Diaphragm valves close by means of a flexible diaphragm attached to a compressor.
|
|
Drum heaters are used to heat containers of viscous materials. They can be wrapped around or placed inside containers that hold substances such as wax or grease.
|
|
Drum pumps are used to transfer materials from a container into a process or other container. They may be electrically, hydraulically, or pneumatically powered depending on the working environment or application.
|
|
Filtration media and elements are designed to remove suspended particles from a process stream. This product area includes bulk filter media, cartridges, housing-only products, and housing and filter assemblies.
|
|
Flat ceramic fiber heaters consist of an iron-chrome-aluminum (ICA) heating element and a thick layer of ceramic fiber insulation within a non-curved housing.
|
|
Flow meters (flowmeters) and flow sensors are devices used for measuring the flow rate or quantity of a moving fluid or gas.
|
|
Flow switches are devices that monitor flow and send a trip signal to other devices, like a pump, for protection. These switches can be used for the measurement of gases, liquids, and steam.
|
|
Gearmotors consist of an AC or DC motor with an integral gearbox or gear head that steps delivered speed up or down.
|
|
Human machine interfaces (HMI) are operator interface terminals with which users interact in order to control other devices.
|
|
Humidity measurement instruments test for absolute humidity, relative humidity, or dew point in air.
|
|
Immersion heaters are used in applications that require immersing the heater in the substance to be heated.
|
|
Incremental rotary encoders are multi-turn sensors that use optical, mechanical, or magnetic index-counting for angular measurement. They contain no absolute reference, but instead count relative to the turn-on position.
|
|
This is a general search form for all types of industrial heaters, devices which are available in a variety of sizes, shapes, and heating configurations.
|
|
Industrial liquid handling pumps are classified in many different ways, and are distinguished by the media pumped and the fluid motive mechanism (dynamic or displacement).
|
|
Industrial valves are classified in many different ways. They can be distinguished by material of construction, media handled, and/or application.
|
|
Level gauges are industrial meters used to determined the level of a liquid in a fixed storage or process tank
|
|
Level sensors are used to detect liquid or powder levels, or interfaces between liquids. There are two basic level-measurement types: continuous and point or multi-point.
|
|
Level switches is a generic search form for devices that are used to detect liquid or powder levels, or interfaces between liquids. These level measurements are indicated via an electrical switching action.
|
|
Level transmitters or level transducers are used to measure the level of a liquid or bulk solid material (as well as slurries) within a specified space. For each measurement, they provide an electrical output that is proportional to the input level.
|
|
Liquid level switches are used to detect specific liquid levels or interfaces between liquids. These level measurements are indicated via an electrical switching action.
|
|
Moisture meters are used to measure the moisture content in bulk solids, liquids and gases.
|
|
Noncontact infrared temperature sensors absorb ambient infrared (IR) radiation given off by a heated surface. They are used in applications where direct temperature measurement is not possible.
|
|
Nozzles alter and control the stream or spray pattern of a fluid in a spray coating or dispensing system.
|
|
Over-the-side heaters are immersion heaters that hang over the side of a tank of heated material.
|
|
Particle analyzers are used to determine the physical makeup of individual particulates in aerosols, dispersion, emulsions, powders, and other samples.
|
|
pH and oxidation reduction potential (ORP) instruments measure or monitor pH (relative concentration of hydrogen ions [H+] in a solution) as well as ORP.
|
|
pH transmitters provide electrical outputs that are proportional to potential of hydrogen (pH) inputs.
|
|
Pipe fittings cover many components that connect pipe ends for in-line, offset, multi-port, and mounting configurations.
|
|
Pressure gauges are used for a variety of industrial and application-specific pressure monitoring applications. Uses include visual monitoring of air and gas pressure for compressors, vacuum equipment, process lines and specialty tank applications such as medical gas cylinders and fire extinguishers.
|
|
Pressure instruments are used to measure, monitor, record, transmit or control pressure.
|
|
Pressure transmitters translate the low level output of a sensor or transducer to a higher level signal suitable for transmission to a site where it can be further processed. These devices include pressure sensors, transducers, elements, and instruments.
|
|
Programmable logic controllers (PLCs) are the control hubs for a wide variety of automated systems and processes. They use a wide variety of inputs and outputs and provide network capability.
|
|
Proximity sensors, all types is a general search form for all proximity sensors and presence detection product areas.
|
|
Pushbutton switches are mechanical switches defined by the method used to activate the switch. The activation method is typically in the form of a plunger that is pushed down to open or close the switch.
|
|
Radiant flat panel heaters are used to heat objects via radiant heat transfer.
|
|
Refractometers measure the critical angle of refraction through a sample. The critical angle of refraction will change with concentration.
|
|
RF transmitters are electronic devices consisting of an oscillator, modulator, and other circuits that produce an RF signal.
|
|
Sensor transmitters are measurement or signal conditioning packages that provide a standard, calibrated output from a sensor or transducer in the form of a current loop output (e.g., 4-20 mA).
|
|
Signal amplifiers accept signals from sensors and other devices and amplify them to levels suitable for further processing or digitization by computer elements.
|
|
Signal conditioning products provide amplification, filtering, converting, and other processes required to make sensor output suitable for reading by computer boards.
|
|
Solenoid valves are devices that use a solenoid to control valve activation.
|
|
Sound level meters and noise dosimeters are used in sound and noise analysis. Applications include industrial safety, traffic noise studies, and scientific noise measurement.
|
|
Strip heaters are clamped onto objects and used to heat a variety of different materials. Strip heaters can also be used to heat air or objects radiantly.
|
|
Switches are used to allow electric current to flow when closed. When opened, they prevent current flow. Common switch types include pushbutton, rocker, toggle, rotary coded DIP, rotary DIP, key lock, slide, snap action, and reed.
|
|
Temperature controllers accept inputs from temperature sensors or thermometers, and then output a control signal to keep the temperature at the desired level.
|
|
Temperature instruments use contact or noncontact methods to measure temperature. Products include dial, digital, industrial and laboratory thermometers; temperature probes, indicators, and sensors; RTD elements and transmitters; and thermistors, thermocouples, thermopiles, and thermal switches.
|
|
Temperature probes are used in various temperature sensing applications. Technology options include thermocouple, RTD, thermistor and solid state style probes.
|
|
Terminal blocks are modular, insulated blocks that secure two or more wires together. Terminal blocks consist of an insulating body and a clamping device. Their flexibility allows wiring to be centralized and makes it easier to maintain complex control circuits.
|
|
Thermistor temperature probes sense temperature by using thermistors, devices made of semiconductor materials which exhibit a large change in resistance for a small change in temperature.
|
|
Thermocouple temperature probes are bimetallic probes that are used in various temperature-sensing applications. They consist of two wires, each of which is made of a different metallic element or alloy.
|
|
Tubing is used to transport fluid and gas in pneumatic, hydraulic, or process applications. Tubing differs from pipe in that tubing's outside diameter or size is controlled and used for product designation.
|
|
Tubular heaters are generally used in custom heating applications. Base (tubular) heating elements can be bent into standard or custom shapes.
|
|
Universal process controllers constitute a broad area of control devices that may be employed in the monitoring and control of many different process variables, including temperature, pressure, flow and other values.
|
|
Volumetric liquid flow switches measure the flow or quantity of a moving fluid in terms of a unit of volume per time, such as liters per minute. These flow sensing devices have a switch output.
|
