Avago Technologies - Product Announcements

Avago Technologies' MGA-43228 and MGA-43328 are 29dBm High Linearity Power Amplifier Modules designed specifically for 2300-2700MHz High Power WLAN/WiMAX/LTE CPE applications. The devices' High Linear Pout performance is achieved through the utilization of Avago's proprietary 0.25um GaAs Enhancement-mode pHEMT process. (read more)

Avago Technologies MGA-30x89 family consist of three high linearity broadband gain blocks/driver amplifiers based on Avago's proprietary 0.25um GaAs Enhancement-mode pHEMT process. (read more)

The Avago AMMC-5025 is a 30KHz to 80GHz ultra broadband traveling wave amplifier. This device is suitable for instrumentation and high speed digital communications. (read more)

The AFCT-711XPDZ 1310 nm XFP optical transceiver is a high performance, cost effective module for serial optical data communications applications specified for signal rates of 9.95 Gb/s to 11.3 Gb/s. The module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. (read more)

Avago Technologies Announces Industry's First Surface Mount High Brightness Round and Oval LED Lamps for Electronic Sign Applications (read more)

The RoHS 6 compliant and Halogen free ACMD-7410/7609/7606 are High Performance Duplexers for UMTS Bands 2, 4 and 8.

The series enhances the sensitivity and dynamic range of handset receivers by providing high isolation of the transmitted signal from the receiver input and high rejection of transmit-generated noise in the receive band. (read more)

The Avago Technologies' ACFM-7104 is a miniature quintplexer that combines an extended frequency range PCS duplexer (Blocks A-G) with a Cellular duplexer and GPS filter.

This device simplifies handset applications that are designed for simultaneous voice service and GPS positioning. (read more)

The Avago ACPF-7005 is a miniaturized Bandpass Filter designed for use in handsets and mobile data terminals operating in the PCS (Blocks A-G)/UMTS Band 2 Tx frequency range (1850.6 – 1914.4 MHz). (read more)

The AVT-51663/AVT-53663 are broadband gain blocks designed to operate from DC to 6000MHz. These devices utilize a Darlington configuration and complement the performance of other Avago Silicon Gain Block products, but at a higher frequency band. Using Avago's InGaP HBT technology, the AVT-51663/AVT-53663 products feature high linearity, low current consumption and excellent ESD Protection. (read more)

Avago and FAULHABER Group developed the world's smallest rotary encoder. The low power, high resolution miniature rotary encoder incorporates Avago's AEDR-8400 integrated circuit for use in a range of applications for miniature motors. (read more)

Avago Technologies ASMT-FJ60-AFJ00 is a SMT (Surface Mount Technology) dome lamp uses an untinted, nondiffused lens to provide high luminous intensity within a narrow radiation pattern. The device is made by encapsulating LED chip on axial lead frame to form molded epoxy lamp package with 6 bended leads for surfacing mounting. (read more)

The Mini PLCC-2 SMT LEDs is suitable to be used in Interior Automotive applications. It has a wide viewing angle at 110 degrees that makes these LEDs ideally suited for instrument cluster panel, push button, HVAC and ambient decorative lighting application in automotive interior. (read more)

Avago's automotive 2.5 Amp Gate Drive R²Coupler with Integrated Desaturation (V_CE) Detection and Fault Status Feedback makes automotive IGBT V_CE fault protection compact, affordable, and easy-to-implement. (read more)

The 400-1500MHz MGA-633P8 is the latest addition to Avago's family of ultra-low noise, high gain/linearity GaAs Active Bias LNAs. The MGA-633P8 achieves Best in Class NF (0.38dB @ 900MHz) performance and is designed to be used as first stage LNA within cellular base station transceiver radio cards, tower mounted amplifiers (TMA), combiners, repeaters and remote/digital radio heads. (read more)

This family of SMT LEDs is packaged in the industry standard PLCC-4 package with additional heat sinking capability enabling it to be driven at even higher current. These SMT LEDs have high brightness and reliability performance and are designed to work under a wide range of environmental conditions and are ideally suited to be used under indoor full color signs application conditions. (read more)

The AFEM-S260 is a low loss SP4T and is designed to handle the +25 dBm linear power required to support WiMAX requirements. The module includes a high quality CMOS integral detector for accurate reading on transmitted power, and also includes a temperature sensor. (read more)

The MGA-2xx03 is a high gain, fully matched, small, cost effective linear power amplifier with good efficiency over the entire band that meets industry-standard spectral emission mask (SEM) tests at the stated power at 3.3V. This allows the customer to achieve standards-compliant performance in a small space with low current and minimal design time in a fixed or portable device. (read more)

The AVT-50663/AVT-52663 are broadband gain blocks designed to operate from DC to 6000MHz. These devices utilize a Darlington configuration and complement the performance of other Avago Silicon Gain Block products, but at a higher frequency band. Using Avago's InGaP HBT technology, the AVT-50663/ AVT-5233 products feature high linearity, low current consumption and excellent ESD Protection. (read more)

The MGA-24106 is a low-noise amplifier (LNA) which is housed in a miniature uDFN (1.5mm x 1.2mm x 0.5mm) package. Designed for GPS/ISM/Wimax applications in the (0.9-3.5) GHz frequency range, the device offers a very low noise figure combined with high linearity which improves the sensitivity of the GPS receiver significantly. (read more)

The AMMP-6441 is a high gain 0.4W surface mount power amplifier with excellent linearity. The device utilizes a 50 Ohm matched input/output and is ideal for use in transmitters as a driver or last stage power amplifier that operates at frequencies between 36GHz and 40GHz. Within this operational band, the AMMP-6441 provides 26 dBm of output power (P-1dB) and 20dB of small-signal gain. (read more)

The AFBR-79Q4xACyyZ four-channel, QFSP front panel pluggable, Parallel Optics Active Optical Cable solution is a high performance integrated cable optimized for short-range parallel multi-lane data communication and interconnect applications. This 4-channel device is capable of 10Gbps per channel for an aggregate of 40Gbps per link at distances from one to 100m. (read more)

The Avago MGA-231T6 is a Low-Noise Amplifier (LNA) designed for GPS/ISM/WiMAX applications.

The LNA uses Avago's proprietary GaAs enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity. (read more)

The Avago ALM-1912 is a GPS front-end module that combines a GPS FBAR filter with High-gain Low-noise amplifier (LNA).

The LNA uses Avago's proprietary GaAs enhancement-mode pHEMT process to achieve high gain with very low noise figure and high linearity. (read more)

The Avago AFBR-703SDDZ transceiver is part of a family of SFP+ products. This transceiver utilizes Avago's 850nm VCSEL and PIN Detector technology to provide an IEEE 10Gb Ethernet design compliant with the 10GBASE-SR standard and allows the operation at 1.25GBd for Gigabit Ethernet application. (read more)

Fiber Optic Transmitter/Receiver for SERCOS, PROFIBUS and INTERBUS-S Applications (read more)

The new ACPL-x6xL is an optically coupled optocoupler that combines an AlGaAs light emitting diode and an integrated high gain photo detector addresses the low power need. (read more)

The HCPL-3120 gate drive optocouplers contain a GaAsP LED. The LED is optically coupled to an integrated circuit with a power output stage. (read more)

The ALM-38140, which is a 50MHz to 4 GHz PIN diode attenuator module, is a fully integrated solution that uses Avago's low distortion silicon PIN diodes housed in a miniature 3.8 mm by 3.8 mm by 1.0 mm multiple-chip-on board (MCOB) package with 6-pin configuration pads. (read more)

Designers of mobile WiMAX/WiBRO systems face many challenges when designing and specifying the RF front end. Avago has addressed these concerns with a new solution that consists of three separate small standalone modules. (read more)

Avago can provide the right encoder solution for your applications and motor feedback needs. These encoder solutions meet the stringent requirements of precise positioning and velocity sensing in a wide range of applications. Avago offers a "one-stop encoder solution" with its extensive portfolio of encoders, decoders and controllers. (read more)

One of the key enablers for optocouplers to handle automotive grade 1 applications is the use of very high performance LEDs. The LED light output dropping by less than 0.2%/°C, aids in achieving high temperature specifications and the improvements in LED design and fabrication. (read more)

The 850nm XFP transceiver is a high performance, cost effective module for serial optical data communications applications specified for signal rate of 10.3125 Gb/s. (read more)

Proximity sensing in mobile phones turns off the LCD backlight (power saving) when answering a call and the phone is near to the ear. (read more)

The demand for high quality, cost effective fiber optics is increasing. This flash shows a comparison of the current market transceivers and how Avago's SFP transceiver is superior and more effective. This SFP transceiver will meet the market demands as the growth continues. (read more)

This flash shows a breakthrough in packaging technology that brings wireless chip micro-miniaturization and high frequency performance to new levels. (read more)

This demo shows how unwanted signals can be isolated including insulating high voltages and magnetic fields by using Avago's optocouplers. (read more)

View the motion control product demo and see how our smallest optical encoders, employing reflective technology for motion control purposes, can be used in a variety of applications. (read more)

View Avago's navigation sensors product demo. See how it tracks on various surfaces with greater accuracy. The sensors can be used in computer mouse, pen mouse, optical trackball, printer, sewing machine and more. (read more)

Designers of mobile WiMAX/WiBRO systems face many challenges when designing and specifying the RF front end. There are issues with system power output, FCC regulations, power consumption, and interference with local cellular radios. Other issues are layout and design flexibility, and the potential need for custom modules. (read more)