Information about Plastic Valves

Plastic valves are made from plastic materials and are used in applications that require corrosion resistance and/or chemical handling. They are made from acetal polymers, polyvinyl chloride (PVC), chlorinated PVC (CPVC), polytetrafluoroethylene (PTFE), polyethylene (PE), polypropylene (PP), and polyvinylidene fluoride (PVDF). Acetal polymers offer excellent lubricity, fatigue resistance, and chemical resistance. PVC provides good flexibility, smooth surfaces, and nontoxic qualities. CPVC is suitable for high temperature applications and is used in hot water distribution. PTFE exhibits a high degree of chemical resistance and a low coefficient of friction. PE is a soft, flexible and tough plastic with outstanding electrical properties but poor temperature resistance. It is prone to stress cracking and has poor resistance to ultraviolet (UV) light. PP is similar to PVC, but can be used in exposed applications because of its resistance to UV, weathering and ozone. PVDF has good wear resistance and excellent chemical resistance, but does not perform well at elevated temperatures.

Products & Services Related to Plastic Valves

Butterfly Valves

Butterfly valves control flow through a circular disc or vane by turning the valve's pivot axis at right angles to the direction of flow in the pipe. They are normally used as throttling valves to control flow.

Check Valves

Check valves are self-activating safety valves that permit gases and liquids to flow in only one direction, preventing process flow from reversing. They are classified as one-way directional valves.

Globe Valves

Globe valves are linear motion valves with rounded bodies, from which their name is derived. They are widely used in industry to regulate fluid flow in both on/off and throttling service.

Needle Valves

Needle valves are small valves used for flow control in liquid or gas services. The fine threading of the stem and the large seat area allow for precise resistance to flow.

Pinch Valves

Pinch valves includes any valve with a flexible elastomer body that can be pinched closed, cutting off flow, using a mechanism or fluid pressure.

Solenoid Valves

Solenoid valves are devices that use a solenoid to control valve activation.

Solids Valves

Solids valves are used to control or regulate the flow of powder, granular and other bulk solid materials along a process line, or to and from process units, storage bins, conveyors and product packaging.