News for Wilks Enterprise, Inc.:
|
02/25/2010
|
A new website – www.WilksIR.com – focused on providing simple analytical solutions for practical on-site measurements. It features easy-to-use application specific mid-infrared analytical instruments for qualitative and quantitative measurements.
|
|
02/16/2010
|
InfraCal TOG/TPH Analyzers provide accurate, easy on-site analysis to assist regulators, as well as industry, to reduce the build up of fats, oils, and greases (FOG) in sewers.
|
|
01/07/2010
|
The InfraSpec VFA-IR Spectrometer, with a new flow-through sample system, is now capable of accurately measuring biodiesel in diesel fuel down to 0.05% in less than one minute.
|
|
01/07/2010
|
The easy-to-use InfraRan Specific Vapor Analyzer provides accurate, on-site, real-time measurements of SF6. It is factory calibrated for measuring SF6 in the 0 - 5 parts per million (ppm) concentration range with resolution to 0.01 ppm.
|
|
11/11/2009
|
A major petroleum terminal has begun successfully transporting blended biodiesel through a distribution pipeline using Wilks analyzers to help ensure blend quality.
|
|
08/19/2009
|
InfraCal TOG/TPH Analyzers are designed for easy, on-site measurement of total oil/grease, petroleum hydrocarbon, and fats, oil and grease concentration levels in produced water on off-shore platforms or wastewater at refineries or treatment facilities.
|
|
07/31/2009
|
InfraCal Blend Analyzers are rugged, compact, portable and easy to use by non-technical personnel. They provide a direct readout in either % biodiesel or % ethanol giving the user the capability to measure the blend ratio on-site – in less than a minute.
|
|
05/13/2009
|
Determining oil/grease levels to ensure compliance with regulatory permit requirements for discharging wastewater is a worldwide problem facing all segments of the oil/gas industry. The InfraCal TOG/TPH Analyzers offer the ideal measurement solution.
|
|
04/23/2009
|
Nuclear power plants need to maintain a large quantity of stored diesel fuel. The presence of biodiesel in the fuel is a major concern. The InfraCal Biodiesel Blend Analyzer measures the presence of biodiesel in diesel in under one minute.
|
|
03/06/2009
|
To successfully implement synthetic jet fuels into a fuel supply, it is essential to know the blend ratio of synthetic to standard jet fuel. The InfraSpec Spectrometer was evaluated by a major terminal storage company as a tool to analyze this ratio.
|
|
02/17/2009
|
The InfraCal Ethanol Blend Analyzer provides accurate percent ethanol blend measurements in under a minute. It eliminates the need to wait days for off-site test results and is ideal for tanker spot checks or use at fuel terminals and service stations.
|
|
01/16/2009
|
With the public image vacillating between food versus fuel issues and the environmental advantage of biofuels, it is important to keep quality blend standards high to further biofuels acceptance. Portable Mid-IR Analyzers are essential to this goal.
|
|
01/15/2009
|
The Water Environment Research Foundation (WERF) sponsored a study to evaluate performance of grease interceptors. The InfraCal HATR-T2 Analyzer was used to measure the levels of fats, oil and grease in the wastewater leaving the interceptors.
|
|
10/29/2008
|
Tax incentives and government regulations are based on percent biofuel, making it important to accurately determine proper blend ratios. The easy-to-use InfraCal Biodiesel Blend Analyzer provides measurements in under a minute to ensure a proper blend.
|
|
10/29/2008
|
To comply with government regulations and avoid costly fines for exceeding permit discharge levels, frequent wastewater measurements are necessary to determine oil/grease levels. InfraCal Analyzers provide easy, on-site oil/grease measurements.
|
|
08/06/2008
|
On-site measurement of soot levels in diesel engine lube oils at levels as high as 12 - 15% takes less than 30 seconds with the InfraCal Soot Meter. This compact, pushbutton analyzer provides direct readout of soot level without sample preparation.
|
|
08/06/2008
|
The InfraRan Analyzer provides accurate, on-site, real-time measurements of SF6. It is factory calibrated for measuring SF6 in the 0 -5 ppm concentration range with resolution to 0.01 ppm. The analyzer is ideal for ASHRAE 110 fume hood evaluations.
|
|
06/11/2008
|
Several biodiesel plants have been fined for illegally discharging oil and grease and polluting streams. While these plants are new to the industrial community, they must be good neighbors, properly dispose of oily waste and comply with regulations.
|
|
04/04/2008
|
Two portable, easy-to-use mid-IR analyzers for use by producers, distributors, fleet managers, or regulators to measure the percent ethanol in gasoline and/or water in ethanol or methanol in less than one minute are available from Wilks Enterprise, Inc.
|
|
01/16/2008
|
InfraCal TOG/TPH Analyzers provide an accurate, easy on-site analysis method to assist regulators, as well as numerous industries, to reduce the build up of fats, oils, and greases (FOG) in sewers.
|
|
01/14/2008
|
A new IR Spectrometer with a 128 pixel detector array that provides expanded capabilities and better performance, including 75x increase in signal-to-noise ratio, 1.5x improvement in spectral resolution, and updated calibration capabilities.
|
|
01/10/2008
|
At PITTCON ’08, in Booth No. 2908, Wilks Enterprise will feature two portable, easy-to-use mid-IR analyzers for use by producers, distributors, fleet managers, or regulators for various on-site biofuels measurements.
|
|
12/06/2007
|
Brochure discusses two easy-to-use mid-infrared analyzers for various biofuels analyses that are ideal for on-site analysis of biodiesel in diesel, ethanol in gasoline, water in ethanol, total gylcerides, FFA’s in feedstock and water in feedstock.
|
|
11/09/2007
|
Wilks Enterprise, Inc. has introduced the InfraSpec VFA-IR Spectrometer, a portable mid -infrared spectrometer that gives spectral, quantitative or qualitative information, for easy, on-site biofuel analyses.
|
|
10/05/2007
|
The US EPA has established limitation guidelines for discharges of oily wastes from facilities that produce, maintain or rebuild metal products and machinery. This affects virtually any company that uses oil and grease in their manufacturing process.
|
|
09/07/2007
|
Extended drain times, combined with stringent emission requirements, make it important to check soot levels in diesel engine oils. The InfraCal Soot Meter is a portable IR analyzer providing accurate, direct readout of the percent soot in diesel oils.
|
|
08/16/2007
|
The InfraCal Filtometer is portable and easy to use for non technical personnel, providing a direct readout in % biodiesel or % ethanol allowing the capability to measure the blend ratio at a manufacturing or distribution facility in under a minute.
|
|
08/16/2007
|
Determining total hydrocarbon levels is a problem facing industry today to ensure compliance with governmental permit requirements for discharge of wastewater. InfraCal TOG/TPH Analyzers are specifically designed for this measurement.
|
|
06/29/2007
|
The InfraSpec VFA-IR Spectrometer with a new 128 pixel detector array has a 1.5x improvement in resolution and a signal-to-noise ratio 75 times greater over the previous 64 pixel detector array system.
|
|
05/18/2007
|
A portable, mid-IR analyzer for on-site measurement of 4 anesthetic gases, is now available. The InfraRan 4-Gas Anesthetic Specific Vapor Analyzer provides real-time measurements of Nitrous Oxide, Desflurane, Isoflurane, and Sevoflurane.
|
|
04/26/2007
|
The portable InfraRan Specific Vapor Analyzer provides on-site, real-time measurements of Isoflurane in the 0-30 parts per million (ppm) concentration range with resolution of less than 1 ppm.
|
|
04/24/2007
|
New European regulations governing the measurement of oil-in-water, a 15% hydrocarbon emission reduction target and Hydrocarbon Trading have all heightened the importance of monitoring oil concentration levels.
|
|
01/24/2007
|
Wilks Enterprise, Inc. introduced two easy-to-use mid-infrared analyzers for biofuels analysis for production facilities and for fuel blending at distribution centers.
|
|
10/04/2006
|
Measuring the percent of biodiesel in diesel fuel using new portable infrared spectrometer
|
|
10/03/2006
|
ON-SITE VERIFICATION OF CHEMICAL AND PHARMACUETICAL MATERIALS USING NEW MID-IR SPECTROMETER
|
|
10/02/2006
|
TRANS-FATTY ACID MEASUREMENT USING
NEW PORTABLE MID-INFRARED SPECTROMETER
|
|
09/29/2006
|
Wilks Enterprise delivers Portable Refrigerant Gas Monitors
to the British Ministry of Defense (MOD)
|
|
09/25/2006
|
Rapid, On-Site Measurement of Soot Levels In Diesel Engine Lubricating Oils
|
|
09/20/2006
|
On-Site TPH-in-Soil Measurements in less than 10-15 Minutes
Using New ASTM Method D 7066-04
|
|
09/18/2006
|
ASTM STANDARD TEST METHOD D 7066-04 FOR ON-SITE MEASUREMENT OF OIL AND GREASE CONCENTRATION LEVELS IN WATER
|
|
09/15/2006
|
On-Site, Real-Time Nitrous Oxide Measurements
with New Portable Infrared Gas Analyzer
|
|
09/14/2006
|
New Portable Infrared Gas Analyzer
For SF6 Tracer Gas Measurements
|
|
09/12/2006
|
Portable Infrared Analyzer Provides Safe, Easy and Accurate Method
For Measuring Nylon Layer in Plastic Films in Under One Minute
|
|
09/08/2006
|
% ALCOHOL-IN-BEVERAGES EASILY MEASURED USING NEW PORTABLE INFRARED SPECTROMETER
|
|
09/06/2006
|
Determination of Unsulfonated Matter in Surfactants Using a Portable Infrared (IR) Analyzer
|
|
09/05/2006
|
PORTABLE INFRARED ANALYZER HELPS INDUSTRIES MEET
STRICTER REGULATIONS IMPOSED BY NEW EPA WATER EFFLUENT GUIDELINES
FOR “OILY WASTES”
|
|
08/25/2006
|
VARIABLE FILTER ARRAY SPECTROMETER – A NEW CONCEPT IN MID-INFRARED INSTRUMENTATION – FOR LABORATORY, PLANT, AND FIELD USE
|
|
08/18/2006
|
PORTABLE INFRARED GAS ANALYZERS
FOR ON-SITE AMBIENT AIR ANALYSIS
TO HELP ENSURE WORKPLACE SAFETY
|
